We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised V-bridle tow chain with 15 in J hooks and grab hooks, 2 ft legs, Grade 80 steel

VEVOR

VEVOR G80 V Bridle Chain 5/16" 2 ft 10800 lbs 15" J Hooks

SKU CH-30EG-KFYK7

Grade 80 galvanised manganese-steel V bridle chain with 15-inch J hooks and grab hooks, 5/16-inch diameter, two-foot legs, 10800 lbs safe working load

  • TypeOther Appliances
  • Width8.46
  • Grade 80 alloy steel delivers 10800 lbs safe working load
  • Galvanised manganese steel resists corrosion for long service life
  • Two-foot chain legs with 15-inch J hooks suit varied recovery points
  • Includes grab hooks and D-shackle for flexible rigging options
  • Compact 7.3 kg weight eases handling on flatbed wreckers

G80 V Bridle Chain for Heavy-Duty Towing

This Grade 80 alloy steel chain assembly is built for flatbed truck, wrecker and recovery operations. It delivers a safe working load of 10800 lbs using two 5/16 inch diameter legs that each measure 2 ft in length. The unit ships with 15 inch J hooks, grab hooks and a D-shackle for immediate use.

Galvanized Mn Steel Resists Corrosion

All components receive a galvanized surface treatment that protects the Mn steel from rust during long-term outdoor exposure. The complete assembly weighs 16 lbs (7.3 kg) and packs into a compact 8.46 inch width for straightforward storage on a service vehicle.

Center-Load Hooking Prevents Deformation Under

The manufacturer specifies that loads must sit in the center of each hook; edge loading, twisting or inverting the bridle reduces capacity and risks permanent deformation. Observe these constraints during sustained pulls to maintain the rated 4898 kg limit across the full 60 cm leg length.

Highlights

  • Grade 80 alloy steel delivers 10800 lbs safe working load
  • Galvanised manganese steel resists corrosion for long service life
  • Two-foot chain legs with 15-inch J hooks suit varied recovery points
  • Includes grab hooks and D-shackle for flexible rigging options
  • Compact 7.3 kg weight eases handling on flatbed wreckers

Specifications

TypeOther Appliances
Width8.46

Questions about this item

How do I attach the 15" J hooks and grab hooks to a flatbed truck without twisting the 2 ft chain?

Connect each hook to its anchor point so the load sits in the centre of the hook throat, never on the tip. Keep the V-bridle legs straight and the included D-shackle in line; do not let the 5/16" chain twist, invert or twine during hookup.

What wear items on the galvanised Mn-steel G80 bridle will need inspection or replacement after heavy towing cycles?

Check the 5/16" chain links for elongation, the 15" J hooks and grab hooks for throat widening or latch damage, and the D-shackle pin for thread wear. Replace any component that shows permanent stretch, cracks or corrosion beyond the galvanised coating.

At what point does the 10800 lbs safe working limit become the restricting factor during sustained recovery pulls?

The 10800 lbs safe working load is the first limit reached; sustained pulls must stay at or below this figure. Exceeding it risks permanent deformation of the G80 chain or hook failure, so size the load to the 4898 kg rating before each tow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.