VEVOR FT-43-1 Floating Shelf Bracket 43 inch 230 lbs

43-Inch Hidden Shelf Bracket

The VEVOR FT-43-1 is a single-piece steel bracket designed to support a floating shelf up to 43 inches long. It suits homeowners or tradespeople wanting a clean, bracket-free look in living rooms, kitchens, bathrooms or garages. The unit ships with all required mounting hardware and drill bits for immediate fitting. Its concealed design fits flush between the shelf board and the wall surface.

230 lbs Weight Capacity

The bracket is rated to hold a maximum of 230 lbs when properly secured into suitable wall material. This single figure determines whether the product matches the intended load, such as books, kitchenware or decorative objects. The shelf board itself must measure between 44 and 46 inches long, 2.5 to 4 inches thick and 8 to 10 inches wide to fit the bracket correctly. Exceeding the weight limit or using an undersized board will compromise the installation.

Straightforward Installation With Supplied Tools

The package includes a hole locator, slot locator, router bit, wall drill bit and wood drill bit plus 14 expansion tubes, 14 rubber plugs, 14 self-tapping nails and 10 self-tapping screws. A typical failure point occurs when the wall substrate cannot accept the expansion anchors or when the shelf board is not routed precisely to the 1.5-inch bracket width. Accurate marking with the supplied locators and correct drill-bit selection are essential for a secure, level mount.