VEVOR
VEVOR Frost-Proof Yard Hydrant 5.24FT 36" Bury 3/4" NPT 3/4" NH
A frost-proof yard hydrant with 5.24FT length, 36" bury depth and bypass valve drains water to prevent freezing
- TypeOther Appliances
- Width9.84
- Frost-proof operation down to 36 in bury depth
- Bypass valve drains residual water to prevent freezing
- Adjustable lever handle controls flow from gentle to strong
- 3/4 in NPT inlet and 3/4 in NH outlet for leak-free fit
- Cast iron, steel pipe and brass construction weighs 12.52 lbs
Frost-Proof Yard Hydrant with 36" Bury Depth
The VEVOR frost-proof yard hydrant has a 5.24FT overall length and a 36" bury depth that places the valve below the frost line. A bypass valve drains residual water through the bottom hole when the handle is closed, preventing ice formation inside the pipe. It connects to 3/4" NPT supply piping and a 3/4" NH hose coupling with two O-Rings for a leak-free seal. The lever handle adjusts flow from a gentle stream to a powerful spray for garden, farm or yard use.
Suited for Outdoor Irrigation and Seasonal Use
Homeowners, farmers and gardeners who need a reliable year-round water point in freezing climates will benefit from the deep bury design and automatic drainage. The hydrant is not rated for potable water, so it should not be used for drinking supply. Installers without access to 3/4" NPT plumbing or those needing a shorter bury depth should consider alternative configurations.
Sustained Operation in Freezing Conditions
During extended cold periods the bypass valve continues to evacuate standing water each time the handle is lowered, keeping the steel pipe and brass internals clear of ice. The cast iron head and 1595 mm steel pipe withstand repeated freeze-thaw cycles without cracking. Flow remains consistent because the drainage path does not restrict the 3/4" waterway when the hydrant is open.
Highlights
- Frost-proof operation down to 36 in bury depth
- Bypass valve drains residual water to prevent freezing
- Adjustable lever handle controls flow from gentle to strong
- 3/4 in NPT inlet and 3/4 in NH outlet for leak-free fit
- Cast iron, steel pipe and brass construction weighs 12.52 lbs
Specifications
| Type | Other Appliances |
|---|---|
| Width | 9.84 |
Questions about this item
What pipe size must my supply line be for the 3/4" NPT inlet?
Your supply line needs a 3/4" NPT thread to match the hydrant inlet.
Can I keep my existing 3/4" NH hose fitting on the outlet?
Yes, the outlet is a 3/4" NH coupling so your current hose fitting will thread straight on.
How do I verify the bypass valve is draining after I shut the handle?
Watch the bottom drain hole; water should trickle out once the lever is fully lowered.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



