We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brushed oil-rubbed bronze front door handleset with interior knob and deadbolt

VEVOR

VEVOR Front Door Handleset Brushed Oil Rubbed Bronze 20185-AC

SKU CH-GQ49-J360Y

Adjustable single-cylinder handleset in brushed oil-rubbed bronze fits 35-45 mm doors with 195-224 mm hole spacing and includes two keys

  • TypeOther Appliances
  • Width8.39
  • Adjustable hole spacing from 195 to 224 mm avoids redrilling when replacing locks
  • Zinc alloy with copper plating resists corrosion and wear for long service life
  • Components individually packaged to protect each part during handling
  • Fits doors 35 to 45 mm thick with 60 or 70 mm latch options
  • Supplied with three keys, two strike plates and all installation hardware

Front Door Handleset in Brushed Oil Rubbed Bronze

This VEVOR handleset combines a keyed front handle with an interior knob and single-cylinder deadbolt. The brushed oil-rubbed bronze finish suits traditional and contemporary entry doors. It fits right-hand and left-hand openings and comes with three keys, two strike plates and all mounting hardware for a complete installation.

Adjustable Hole Spacing for Easy Retrofit

The outer handle hole spacing adjusts from 195 to 224 millimetres, covering common centre-to-centre measurements on existing doors. This range lets you replace worn locksets without drilling new holes when the old spacing falls within the 7-11/16 to 8-13/16 inch window. The zinc-alloy construction with copper plating resists corrosion and wear over long-term exposure.

Check Door Thickness and Latch Backset Before

Verify your door slab measures between 35 and 45 millimetres thick to match the specified range. Confirm the latch backset is either 60 or 70 millimetres so the included slanting and flat latches align with the bore. The package includes a cylinder, deadbolt rose, washer, pin and manual, but no tools or additional shims.

Highlights

  • Adjustable hole spacing from 195 to 224 mm avoids redrilling when replacing locks
  • Zinc alloy with copper plating resists corrosion and wear for long service life
  • Components individually packaged to protect each part during handling
  • Fits doors 35 to 45 mm thick with 60 or 70 mm latch options
  • Supplied with three keys, two strike plates and all installation hardware

Specifications

TypeOther Appliances
Width8.39

Questions about this item

What door thickness range does the handleset fit?

The set suits doors from 1-3/8 to 1-3/4 inches thick, which is 35 to 45 mm.

Which latch length should I use when installing the deadbolt?

Choose the 2-3/8 inch or 2-3/4 inch latch — 60 mm or 70 mm — that matches your existing door bore.

How often will the cylinder or keys need replacement?

The zinc-alloy cylinder and three brass keys are built for long-term use; replace only if a key is lost or the lock mechanism shows wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.