VEVOR
VEVOR Folding Shower Seat 13.6'' x 12.8'' 450 lbs Specialty Appliance
Wall-mounted folding shower seat supports up to 450 lbs with urea-formaldehyde construction and diatom mud mat for secure seating
- TypeOther Appliances
- Width15.63
- Urea-formaldehyde build resists water, moisture and fading
- Diatom mud mat absorbs water fast and improves grip
- Triangular mounting plate supports up to 450 lbs / 204 kg
- Folds flat against the wall to save bathroom space
- Includes 304 stainless steel screws, drill bit and mounting template
Urea-formaldehyde shower seat for mobility support
The VEVOR folding shower seat is built from urea-formaldehyde with a diatom mud mat that absorbs water and improves grip. It mounts to the wall and folds flat when not in use, making it suitable for seniors, children, pregnant women and anyone with limited mobility who needs a stable place to sit while bathing.
450 lbs load capacity on a 13.6 by 12.8 inch
The triangular mounting plate distributes weight so the seat supports up to 450 lbs or 204 kg across its unfolded dimensions of 13.6 inches by 12.8 inches. This capacity covers most adults, but users who exceed that limit or who require a wider sitting surface will need a different solution.
Mounting hardware and diatom mud mat included
The package supplies the main body, an ABS decorative cover, seven 304 stainless steel ST8 by 70 mm screws, seven nylon bolt caps, seven flat gaskets, a mounting hole guiding sticker, the diatom mud mat, a 10 by 150 mm drill bit and a user manual. No additional fasteners or tools are required for installation.
Highlights
- Urea-formaldehyde build resists water, moisture and fading
- Diatom mud mat absorbs water fast and improves grip
- Triangular mounting plate supports up to 450 lbs / 204 kg
- Folds flat against the wall to save bathroom space
- Includes 304 stainless steel screws, drill bit and mounting template
Specifications
| Type | Other Appliances |
|---|---|
| Width | 15.63 |
Questions about this item
Will the seat stay rigid when mounted on my existing wall studs?
The triangular mounting plate and seven 304 stainless-steel screws (ST8×70 mm) secure the seat to solid framing for a 450 lb / 204 kg load capacity.
How can I verify the seat is safely installed before first use?
After mounting, unfold the seat fully, press down firmly on the centre, and confirm there is no flex or movement at the wall brackets.
What hardware and accessories come in the box, and is anything else required?
Included: main body, ABS decorative cover, seven 304 stainless-steel screws ST8×70 mm, seven nylon bolt caps, seven flat gaskets, mounting-hole guiding sticker, diatom mud mat, 10 mm drill bit, user manual. No extra anchors supplied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



