We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Adjustable hole saw cutter kit with clear dust shield and storage box in open case

VEVOR

VEVOR FJKKQ-40-300 Adjustable Hole Saw Cutter Kit 40-300 mm

SKU CH-WMKW-M99CD MPN FJKKQ-40-300

Adjustable hole saw cuts 40–300 mm diameters up to 30 mm deep with PC dust shield and two pilot bits

  • TypeOther Appliances
  • Width17.32
  • Adjustable 40-300 mm cutting range covers many hole sizes
  • 30 mm cutting depth handles thick material in one pass
  • PC dust shield with 6203Z bearing traps debris for cleaner work
  • Includes HSS and tungsten carbide blades for wood or masonry
  • Complete kit adds pilot bits, drill bits, pencil, wrench and tape

Adjustable Hole Saw Kit 40-300 mm

This adjustable hole saw cutter kit covers diameters from 40 mm to 300 mm with a cutting depth up to 30 mm. It suits electricians, carpenters and DIYers installing recessed lights, ceiling speakers or vent holes. The kit ships new with two pilot bits, HSS and tungsten carbide blades, wood and masonry drill bits, a dust shield, tape measure and storage box.

Installation and Common Issues

Mount the chosen pilot bit, set the diameter with the hex key and secure the PC dust shield before drilling. The shield uses a 6203Z ball bearing so it spins freely while trapping debris. Typical problems are blade dulling in abrasive materials and the shield binding if the gasket is not seated flat.

Diameter Range Decides Fit

The single specification that determines suitability is the adjustable cutting diameter of 40 mm to 300 mm. If the project requires holes smaller than 40 mm or larger than 300 mm this kit cannot meet the need.

Highlights

  • Adjustable 40-300 mm cutting range covers many hole sizes
  • 30 mm cutting depth handles thick material in one pass
  • PC dust shield with 6203Z bearing traps debris for cleaner work
  • Includes HSS and tungsten carbide blades for wood or masonry
  • Complete kit adds pilot bits, drill bits, pencil, wrench and tape

Specifications

TypeOther Appliances
Width17.32

Questions about this item

How do I confirm the cutter is working correctly after setup?

The cutter should produce a clean hole between 40 mm and 300 mm in diameter with a maximum depth of 30 mm, and the 6203Z ball bearing dust shield should spin freely while trapping debris.

What comes in the box and what must I purchase separately?

The kit includes the adjustable hole saw, PC dust shield, storage box, auger pilot bit, HSS pilot bit, HSS and tungsten carbide blade sets, five brad-point wood bits, five masonry bits, carpenter pencil, hex key, and 3 m tape measure; no extra items are included.

Which version should I choose for my project?

This single model FJKKQ-40-300 covers the full 40 mm to 300 mm range, so select it when you need any diameter within that span and a 30 mm cutting depth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.