We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical 10 gallon steel tank on wheels with hose and gun

VEVOR

VEVOR FF-Q904 10 Gallon Sand Blaster 60-110 PSI 7.5ft Hose 2 Ceramic Nozzles

SKU CH-W271-A72RP

A 10 gallon abrasive blasting tank operating at 60-110 PSI with a 7.5 ft hose and two ceramic nozzles for rust and paint removal

  • TypeOther Appliances
  • Width19.29
  • 10 gallon tank handles large surface jobs
  • 60 to 110 PSI working pressure cleans rust and paint fast
  • Semi-automatic pull-up feed port simplifies abrasive loading
  • Two ceramic nozzles resist wear for longer use
  • 5 ft hose and 7.7 inch wheels give good mobility

Heavy-Duty Sand Blaster for Large-Area Surface

The VEVOR FF-Q904 is a 10 gallon abrasive blasting tank built for efficient removal of rust, stain, paint and marble engravings. It operates at 60-110 PSI with an air consumption of 6-25 CFM and requires a separate 5.5KW air compressor. The unit holds a suggested 4.2 gallons of dry 60-100 grit media such as coal slag, glass beads or walnut shells.

Semi-Automatic Feeding and Upgraded Gun Design

A pull-up feeding port simplifies adding and removing abrasives while preventing leaks and contamination. The aluminium heavy-duty gun replaces traditional brass ball valves for improved durability and control. The kit includes a 7.5 ft hose, two ceramic nozzles pre-sized at 1/8 inch and 3/32 inch, a sandblasting face mask, three rubber pads, five washers, five small R-type pins and a user manual.

Compressor and Media Requirements to Verify

You must supply a 5.5KW air compressor capable of delivering the required CFM range at 60-110 PSI. Ensure all abrasive media is completely dry to avoid clogging the system. The tank weighs 39.8 lbs and measures 20.5 x 15.0 x 37.4 inches on 7.7 inch wheels, so confirm your workspace accommodates these dimensions and weight.

Highlights

  • 10 gallon tank handles large surface jobs
  • 60 to 110 PSI working pressure cleans rust and paint fast
  • Semi-automatic pull-up feed port simplifies abrasive loading
  • Two ceramic nozzles resist wear for longer use
  • 5 ft hose and 7.7 inch wheels give good mobility

Specifications

TypeOther Appliances
Width19.29

Questions about this item

What pressure range does the FF-Q904 operate at, and what compressor power is needed?

The tank runs at 60-110 PSI and consumes 6-25 CFM, so you must supply a separate 5.5 kW air compressor to reach those figures.

What are the overall dimensions and wheel size for fitting the 10-gallon tank in a workshop?

The unit measures 20.5" x 15.0" x 37.4" and rolls on Ø7.7" x 1.6" wheels, weighing 39.8 lbs when empty.

How do I load abrasive into the semi-automatic pull-up feeding port without causing clogs?

Fill only dry 60-100 grit media up to the suggested 4.2-gallon capacity; damp abrasive will block the nozzle and halt blasting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.