We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue vertical steel tank on wheeled frame with motor housing and gauges

VEVOR

VEVOR FB1500D0-20C80 20 Gallon 4HP 10.6 CFM 78dB Air Compressor

SKU CH-VQ5E-DJCDH

A 20-gallon steel-tank air compressor delivering 10.6 CFM at 90 PSI with a 78 dB ultra-quiet oil-free motor for workshop and automotive tasks

  • TypeOther Appliances
  • 20 gallon steel tank stores ample air for extended tool runs
  • 4 HP oil-free motor delivers 10.6 CFM at 90 PSI for fast inflation
  • 78 dB quiet operation uses multi-layer silencer for low-noise workshops
  • 125 PSI maximum pressure powers impact wrenches, spray guns and nailers
  • Four 6-inch casters move the 134.7 lb unit easily around the shop

20 Gallon Steel Tank Compressor

This 20 gallon steel tank compressor delivers 10.6 CFM at 90 PSI with a 4HP oil-free motor running at 1680 RPM. It suits workshops needing reliable air for nail guns, impact wrenches, spray guns and tire inflation. The 75 litre capacity supports extended use across auto repair, spray painting and woodwork nailing tasks.

78dB Ultra Quiet Operation

The unit runs at 78 dB thanks to a quality silencer built with a thickened muffler cover, rubber muffler pipe and filter cotton. Oil-free operation removes the need for lubricant changes and reduces maintenance. The intake pipe uses high-temperature resistant silicone with stainless steel braided mesh for durability. Maximum pressure reaches 125 PSI.

Portable Four Caster Design

Four 6 inch casters let you move the 134.7 lbs unit around the shop without lifting. The steel tank measures 35.4 by 16.9 by 28.7 inches, fitting through standard doorways. Six G1/2 plastic shell air filters are included for immediate setup. An instruction manual guides installation and safe operation.

Highlights

  • 20 gallon steel tank stores ample air for extended tool runs
  • 4 HP oil-free motor delivers 10.6 CFM at 90 PSI for fast inflation
  • 78 dB quiet operation uses multi-layer silencer for low-noise workshops
  • 125 PSI maximum pressure powers impact wrenches, spray guns and nailers
  • Four 6-inch casters move the 134.7 lb unit easily around the shop

Specifications

TypeOther Appliances

Questions about this item

How do I install the 20 gallon 4HP compressor and what step is often missed?

Mount the four 6 inch casters, connect the intake pipe with its high-temperature silicone and stainless steel braided mesh, then fill the oil-free pump to the correct level before first start — skipping the oil check causes early wear.

What maintenance will the 10.6 CFM@90 PSI unit need later?

Replace the six G1/2 plastic shell air filters when they clog, drain the 75 litre steel tank daily to prevent corrosion, and inspect the silencer’s rubber muffler pipe and filter cotton for dust buildup.

What limit appears first during sustained use of the 125 PSI max pressure compressor?

The 78 dB noise rating is measured at light load; under continuous 10.6 SCFM delivery the motor heat at 1680 RPM and tank refill cycles become the practical ceiling before the 125 PSI cut-out engages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.