We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red steel engine stand, H-shaped base, four adjustable arms, five casters, 360° rotating head

VEVOR

VEVOR Engine Stand 1500 lbs 360° Adjustable Head 5-Caster 4 Arms

SKU CH-WJPN-AD74B

Holds engines up to 1500 lb with a 360° rotating head and four adjustable arms on a five-caster steel frame

  • TypeOther Appliances
  • Width16.54
  • Supports up to 1500 lb for secure engine mounting
  • 360° adjustable head enables flexible working angles
  • Five casters including four with brakes provide stable mobility
  • Alloy steel construction with electrostatic coating resists rust
  • H-shaped base design improves overall stand stability

Engine Stand for Vehicle Maintenance

This engine stand supports up to 1500 lb (680 kg) for securing engine blocks during repair or rebuild work. The H-shaped steel base replaces a traditional T-design to reduce shaking and tilting. Alloy steel construction with electrostatic spray coating resists rust and deformation over long-term use. It is intended for mechanics and DIYers who need a stable platform for heavy engine assemblies.

Assembly and Mounting

The stand ships with 28 bolts, 34 washers, 14 nuts, 34 spring washers, 20 M8 hex nuts, 4 cross flat head bolts, 3 lock pins, 2 R-springs, 4 brake wheels, 1 no-brake wheel and 4 end covers for on-site assembly. Four adjustable arms with 1.1 in hex head bolts clamp the engine block securely. The 360° rotatable head allows the engine to be turned to any angle for access. A common issue is misaligning the arm brackets during initial bolt-up, which can prevent the head from rotating freely until corrected.

1500 lb Load Capacity

The decisive specification is the 1500 lb (680 kg) maximum load rating; engines exceeding this weight are not supported. The stand measures 29.5 × 33.5 × 35.4 in (750 × 850 × 900 mm) and weighs 62.2 lb (28.2 kg) when assembled. Buyers who need to mount heavier diesel blocks or transmission assemblies should verify the engine weight before purchase. The 16.54 in width dimension applies to the base stance.

Highlights

  • Supports up to 1500 lb for secure engine mounting
  • 360° adjustable head enables flexible working angles
  • Five casters including four with brakes provide stable mobility
  • Alloy steel construction with electrostatic coating resists rust
  • H-shaped base design improves overall stand stability

Specifications

TypeOther Appliances
Width16.54

Questions about this item

How do I verify the 360° rotating head moves freely after assembling the stand?

Turn the head through a full circle; it should rotate smoothly without binding, and the three lock pins must engage securely at the desired angle.

What components are included and is any additional hardware required for mounting an engine?

The package supplies 28 bolts, 34 washers, 14 nuts, 34 spring washers, 20 M8 hex nuts, 4 cross flat head bolts, 3 lock pins, 2 R-springs, 4 brake wheels, 1 no-brake wheel and 4 end covers; no extra fasteners are needed for the 1.1" hex head bolts on the four adjustable arms.

How do I decide which version of this stand matches a 1500 lb engine?

This single model is rated for 1500 lb (680 kg) maximum load, so it covers any engine up to that weight.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.