VEVOR
VEVOR Electric Hoist 440 lbs 40 ft 110V 480W 14ft Remote
Lifts up to 440 lbs with a 40 ft single-line reach and includes a 14 ft wired remote with emergency stop
- TypeOther
- Lift heavy loads up to 440 lbs with 480W motor power
- Operate safely from 14 ft away using wired remote with emergency stop
- Choose single-line 220 lbs at 32 ft/min or double-line 440 lbs at 16 ft/min
- Reach 40 ft lifting height with 12 m steel cable included
- Compact 13.8 x 5.3 x 6.3 inch unit weighs just 24.14 lbs for easy mounting
440 lb electric hoist with 40 ft lift
This 110V electric hoist delivers 480W of motor power for lifting and pulling tasks in garages and workshops. It handles loads up to 440 lbs using a double-line configuration or 220 lbs on a single line. The 14 ft wired remote lets the operator stay clear of the load while controlling movement.
Capacity and headroom
Single-line mode lifts 220 lbs at 33 ft/min to a maximum height of 40 ft. Double-line mode doubles the capacity to 440 lbs at 16 ft/min but reduces the maximum lift to 19.7 ft. The 3 mm braided steel cable is 12 m long and rated for the stated loads. Continuous heavy lifts will trigger thermal protection on the motor.
Mounting brackets and strap kit included
Two mounting brackets, a 1 m strap with metal ring, a 4 m strap and a double-line hook ship in the box. The brackets provide fixed anchor points for the hoist body. The straps and hook enable the double-line rigging needed to reach the 440 lb rating. No additional rigging hardware is required for basic installation.
Highlights
- Lift heavy loads up to 440 lbs with 480W motor power
- Operate safely from 14 ft away using wired remote with emergency stop
- Choose single-line 220 lbs at 32 ft/min or double-line 440 lbs at 16 ft/min
- Reach 40 ft lifting height with 12 m steel cable included
- Compact 13.8 x 5.3 x 6.3 inch unit weighs just 24.14 lbs for easy mounting
Specifications
| Type | Other |
|---|
Questions about this item
Will the 14 ft wired remote let me operate the hoist from the ground while the unit stays mounted on a ceiling beam?
Yes, the 14 ft wired remote cord allows you to stand clear of the load and control the hoist from floor level while it remains fixed overhead.
How can I confirm the 480 W motor and automatic brake are functioning correctly after installation?
Run a test lift with a light load; the motor should start smoothly, the brake must hold the load instantly when you release the button, and the upper limit switch should stop travel at the top.
Which mounting brackets and rigging straps are included so I know what extra hardware to buy?
The box contains two mounting brackets, a 1 m strap with metal ring, a 4 m strap and a double-line hook; you only need to supply suitable bolts or lag screws for your beam.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Xuron 170-II Micro-Shear Flush Cutters Soldering
- Soldering Accessori…
- ![CDATA[]]
Unique-Bargains KSD301 180C NC Thermal Switch Silver Tone
- HI - Soldering
- NC switches;electri…



