We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld concrete vibrator motor unit with long flexible shaft, orange and black plastic housing, stainless steel rod visible

VEVOR

VEVOR Electric Concrete Vibrator JY150 1500W 16000VPM 4.5m Shaft

SKU CH-PT8X-JTSGR

Handheld 1500 W concrete vibrator delivers 16 000 VPM through a 4.5 m flexible shaft to remove air bubbles and level pours

  • TypeOther Appliances
  • Width21.65
  • Powerful 1500W motor drives 16000 VPM vibration for fast air-bubble removal
  • 5 m flexible shaft reaches deep pours without repositioning the motor
  • 30 mm diameter head consolidates 3.8 cm rod concrete efficiently
  • 7 m power cord allows free movement around the slab
  • 3 kg balanced weight reduces operator fatigue during extended use

Handheld Concrete Vibrator 1500W

This 1500W handheld concrete vibrator delivers 16000 vibrations per minute through a 4.5m flexible shaft. It is built for contractors and DIY users who need to remove air bubbles and level fresh concrete in footings, walls and slabs. The 2HP copper motor drives a 30mm diameter pencil head that reaches deep into narrow forms. The unit weighs 16.3kg and includes two spare carbon brushes.

Plug-in Setup with 1.7m Cord

The motor housing connects to mains power via a 1.7m cord so no separate generator is required. Attach the 4.5m shaft by aligning the coupling and tightening the locking collar until it seats firmly. A loose collar is the most common cause of power loss or shaft wobble during operation. Keep the motor vents clear of wet concrete splatter to avoid overheating the windings.

30mm Shaft Diameter Decides Formwork Fit

The vibrating head measures 30mm in diameter and 46cm in length, which determines the minimum rebar spacing and form clearance it can penetrate. If your project requires a smaller head for tight reinforcement cages or a longer reach beyond 4.5m this vibrator will not suit those conditions. Match the head size to your formwork design before purchase.

Highlights

  • Powerful 1500W motor drives 16000 VPM vibration for fast air-bubble removal
  • 5 m flexible shaft reaches deep pours without repositioning the motor
  • 30 mm diameter head consolidates 3.8 cm rod concrete efficiently
  • 7 m power cord allows free movement around the slab
  • 3 kg balanced weight reduces operator fatigue during extended use

Specifications

TypeOther Appliances
Width21.65

Questions about this item

How can I confirm the vibrator is running at the rated 16000 VPM after I connect the 4.5 m shaft?

When the motor is switched on, the 30 mm diameter shaft should transmit a strong, steady vibration to the 46 cm poker. You will feel consistent high-frequency oscillation at the tip and hear a uniform buzz without rattling, indicating the 1500 W copper motor is delivering full speed.

What components are included in the box and is anything else required to start work?

The package contains the motor unit, one 4.5 m vibrating shaft and two spare carbon brushes. No additional parts are needed; simply plug the 1.7 m power cord into a suitable mains outlet and the tool is ready to use.

Which shaft length should I choose if the model offers different options?

This JY150 model is supplied with a single 4.5 m shaft length. There are no alternative shaft lengths listed for this product, so the 4.5 m version is the one to use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.