VEVOR
VEVOR DX2000II Solder Fume Extractor 459 m³/h 280W 10-Speed Remote Control
A 280 W brushless motor moves 459 m³/h of air through four filter stages with ten speed levels and an infrared remote, weighing 23 kg at 64 dB
- TypeOther Appliances
- 280 W brushless motor moves 459 m³/h for rapid fume removal
- Four-stage filter stack traps particles and absorbs harmful gases
- Ten speed levels adjustable from panel or infrared remote
- Runs at 64 dB with 10 000-hour motor life rating
- Includes 2 m exhaust hose, clamps and five filter cartridges
Solder fume extractor for bench work
The VEVOR DX2000II is a bench-top air treatment unit built for soldering, engraving and light welding tasks. A 280 W brushless motor moves up to 459 m³/h of air through a four-stage filter stack that traps particles and absorbs gases.
Sustained operation at 64 dB noise level
The brushless motor is rated for 10 000 hours of running time, so the extractor maintains its suction during long sessions without the performance drop seen in brushed alternatives. Noise stays at 64 dB even at higher speeds, letting the unit run continuously in a shared workshop.
Mobile cart with 2 m exhaust hose
Four primary filter cartridges ship with the unit, one already installed, and a screwdriver is included for filter changes. The 2 m exhaust pipe and two hose clamps let you vent outside, but the 23 kg weight and 425 x 315 x 520 mm footprint mean you need a sturdy bench or cart rather than a shelf.
Highlights
- 280 W brushless motor moves 459 m³/h for rapid fume removal
- Four-stage filter stack traps particles and absorbs harmful gases
- Ten speed levels adjustable from panel or infrared remote
- Runs at 64 dB with 10 000-hour motor life rating
- Includes 2 m exhaust hose, clamps and five filter cartridges
Specifications
| Type | Other Appliances |
|---|
Questions about this item
How loud is the DX2000II when running at full power all day?
The unit produces 64 dB of noise at maximum airflow, which is comparable to a normal conversation and generally comfortable for extended workshop use.
What do I need to provide before the extractor can start filtering fumes?
A standard mains socket for the included power cord is the only external requirement; the package already contains the exhaust pipe, hose clamps, five primary filter cartridges, remote control and screwdriver.
Will the 100 mm exhaust pipe and hose clamps fit the 100 mm ports on my older fume hood?
Yes, the supplied 2 m exhaust pipe and two hose clamps are designed for standard 100 mm connections, so they will mate directly with existing 100 mm ducting or hood collars.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
