We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal CO2 regulator with twin gauges and CGA320 inlet fitting

VEVOR

VEVOR Double Gauge CO2 Regulator 0-60 PSI CGA320 Check Valve

SKU CH-KGRP-WYBFX

A double-gauge CO₂ regulator with CGA320 inlet, 0-60 PSI adjustable range, 65 PSI relief valve, 8 mm hose fitting and built-in check valve

  • TypeOther Appliances
  • Width5.91
  • Adjust pressure 0-60 PSI for perfect carbonation
  • Pressure relief activates at 65 PSI for safety
  • CGA320 inlet with 8 mm hose fits many kegs
  • Built-in check valve stops back-flow into regulator
  • Includes gaskets and clamps for leak-free seal

CGA320 CO2 Regulator for Homebrew

The VEVOR double-gauge regulator connects to a standard CGA320 cylinder and delivers adjustable output from 0 to 60 PSI. A built-in check valve prevents back-flow while the relief valve opens at 65 PSI to protect the system. It accepts 8 mm hose for keg connections.

Installation Notes

Thread the CGA320 nut onto the tank valve and tighten the supplied gasket to seal the joint. Clamp the 8 mm beverage line onto the outlet barb and secure with the included clamp. The manual pressure-relief lever lets you vent excess pressure before disconnecting.

Who This Suits and Who It Doesnt

Homebrewers and draft-beer enthusiasts who need precise carbonation control on a single keg will find the 0-60 PSI range and CGA320 fit straightforward. Buyers who require dual-gauge monitoring of both tank and output pressure or who need higher outlet pressure for soda systems should look elsewhere.

Highlights

  • Adjust pressure 0-60 PSI for perfect carbonation
  • Pressure relief activates at 65 PSI for safety
  • CGA320 inlet with 8 mm hose fits many kegs
  • Built-in check valve stops back-flow into regulator
  • Includes gaskets and clamps for leak-free seal

Specifications

TypeOther Appliances
Width5.91

Questions about this item

How can I confirm the CO2 regulator is working correctly after connecting it to my keg?

The high-pressure gauge should show the tank pressure up to 3500 PSI while the low-pressure gauge reads your chosen setting within the 0-60 PSI range and the pressure relief valve activates automatically at 65 PSI.

What components are included in the package and what extra parts are needed to start using it?

The box contains one regulator unit with built-in check valve and manual pressure relief; you must supply a CO2 cylinder with a CGA320 valve and 8 mm beverage hose separately.

Which version should I choose for a standard homebrew keg setup?

This single model K050101-01Q12-Z1 covers the common CGA320 inlet and 8 mm outlet hose diameter used on most homebrew kegs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.