We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight-inch silver dado blade set with twelve teeth and multiple chippers and shims

VEVOR

VEVOR Dado Blade Set 8 inch 12 Teeth 5/8 Arbor 6500 rpm

SKU CH-7AJJ-X0E1N

Stacking set with two outer blades, five chippers and four shims cuts adjustable grooves in plywood, hardwood and particle board at up to 6500 rpm

  • TypeOther Appliances
  • Width9.84
  • Complete 7-piece set cuts grooves of various widths
  • 12 alloy teeth stay sharp longer in hard materials
  • Laser-cut vents reduce noise and vibration during use
  • Optimized tooth geometry leaves clean edges needing less sanding
  • 6500 rpm maximum speed suits softwood, hardwood, plywood

Complete Woodworking Set

This VEVOR dado blade set includes two 8.0 inch outside blades, five 2-wing chippers, and four metal shims. Mix and match components to cut grooves of various widths for precise joinery. The 12 alloy teeth on each outside blade are made from 65Mn high-hardness steel for durability.

Noise-Reducing Heat Vents

Laser-cut heat expansion slots reduce both noise and vibration during operation. The design keeps the dado blades steady at the maximum speed of 6500 rpm. Smooth, stable cutting performance results in cleaner edges on plywood, OSB, hardwood, and particle board.

5/8 Inch Arbor Compatibility

The set fits table saws with a standard 5/8 inch arbor. Total product weight is 4.19 lbs including all accessories. Buyers needing a different arbor size or a larger diameter blade will need a different set.

Highlights

  • Complete 7-piece set cuts grooves of various widths
  • 12 alloy teeth stay sharp longer in hard materials
  • Laser-cut vents reduce noise and vibration during use
  • Optimized tooth geometry leaves clean edges needing less sanding
  • 6500 rpm maximum speed suits softwood, hardwood, plywood

Specifications

TypeOther Appliances
Width9.84

Questions about this item

How do I install the 8.0 inch dado blade set on a 5/8 inch arbor and what step do people get wrong?

Mount the two outside blades with teeth pointing opposite directions, then stack the five 2-wing chippers and four shims between them to reach the desired width; the step most often missed is alternating the chipper teeth so they do not line up with the outside blade teeth.

What maintenance will the 65Mn alloy steel blades need later?

Clean resin from the 12 teeth and heat vents after each use, sharpen or replace the alloy teeth when cut quality drops, and check the 5/8 inch arbor hole for elongation that can cause vibration.

What limit appears first during sustained cutting at 6500 rpm?

Heat buildup in the 12.7 mm thick blades expands the laser-cut slots, so the noise-reducing vents lose effectiveness and vibration increases before the 65Mn steel dulls.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.