We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red and black drain cleaner machine on four wheels with coiled cable and cutters attached

VEVOR

VEVOR D1000 Drain Cleaner Machine 50FT 1/2 Inch Manual Feed with Wheels 4 Cutters Air Foot Switch

SKU CH-KY6K-7TGPQ

A 50 ft, 1/2 inch manual-feed drain cleaner with air foot switch, four cutters and wheels for 2 to 4 inch pipes

  • TypeOther Appliances
  • Width23.62
  • Manual feed control with air foot switch for precise cable operation
  • 50 ft x 1/2 inch steel core cable resists breakage and corrosion
  • Four interchangeable cutters clear blockages in 2 to 4 inch pipes
  • Smooth-rolling wheels enable easy transport around job sites
  • Includes gloves, hex wrench, drain sticks and user manual

Drain Cleaning for 2–4 Inch Pipes

The VEVOR D1000 is a manual-feed drain cleaner built for pipes from two to four inches in diameter. Its 50-foot, half-inch steel core cable resists breakage and corrosion while navigating curved runs. Four quick-change cutters handle blockages in sinks, floor drains and toilets. The unit suits homeowners, property managers and restaurant operators who need a portable auger for routine maintenance.

Manual Feed with Air Foot Switch

Cable advance and rotation are controlled by hand with a forward/reverse lever, while an air-activated foot switch lets the operator start and stop the motor without using their hands. The 50 ft steel core cable is designed to resist twisting during normal use. Smooth-rolling wheels allow the 65.83 lb machine to be moved between job sites without lifting the main frame.

Wheeled Frame Fits Through Standard Doorways

At 21.4 x 14.2 x 23.8 inches the unit passes through typical interior doors and can be stored on a shelf or in a service vehicle. The package includes a pair of gloves, a hex wrench, two drain cleaner sticks, a hex screw, a washer and a user manual so the operator can begin work immediately. No external pump or separate power pack is required beyond a standard electrical outlet.

Highlights

  • Manual feed control with air foot switch for precise cable operation
  • 50 ft x 1/2 inch steel core cable resists breakage and corrosion
  • Four interchangeable cutters clear blockages in 2 to 4 inch pipes
  • Smooth-rolling wheels enable easy transport around job sites
  • Includes gloves, hex wrench, drain sticks and user manual

Specifications

TypeOther Appliances
Width23.62

Questions about this item

How do I install the wheels and cable on the D1000, and what step is often missed?

Bolt the four wheels to the frame using the supplied hex wrench and washer, then feed the 50 ft x 1/2 inch steel core cable into the drum; the step often missed is tightening the hex screw that locks the cable end to the inner drum so it cannot pull free under torque.

Which parts of the D1000 will need replacement after repeated use?

The 1/2 inch steel core cable and the four interchangeable cutters are wear items; cables can kink or corrode over time and cutters dull when clearing heavy roots or scale, so keep spares for the 2 to 4 inch pipe range.

What is the first limit I will hit when running the D1000 continuously on a long blockage?

The manual feed system relies on operator effort; sustained feeding of 50 ft of cable into a 4 inch line fatigues the arms before the motor overheats, making physical endurance the practical limiting factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.