We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR 10 inch compound miter saw with cast aluminum base and LED guide

VEVOR

VEVOR Compound Miter Saw 10 in 15 A 60T 0-45° LED Cast Aluminum Base

SKU CH-AE0C-GXXHR

A 10-inch compound miter saw with a 15-amp motor, 60-tooth blade, LED alignment and a lightweight cast-aluminium base for precise 0-45° bevel cuts in wood and composite decking

  • TypeOther Appliances
  • Width17.72
  • LED guide projects clear cut lines for accurate alignment
  • 15 A motor delivers 2800 W straight-cut power at 5000 RPM
  • 60-tooth 255 mm blade cuts wood and composite decking
  • Cast aluminium base weighs 11.0 kg for easier transport
  • Left bevel tilts 0-45° for angled joinery and frames

Precision Cutting Tool

The VEVOR compound miter saw uses a 10 inch blade driven by a 15 amp motor to deliver straight cuts at 2800 watts and bevel cuts at 3000 watts. Its 60 tooth blade spins at 5000 RPM for clean results in wood and composite decking. An integrated LED guide projects a clear cutting line to remove guesswork.

Upgrade From Manual Saws

This corded single bevel model replaces hand miter boxes and basic chop saws when repeatable angled cuts are required. The jump is worth it for installers and woodworkers who need to lock angles quickly using the precision scale and reliable locking system. The 0 to 45 degree left bevel capacity handles picture frames and detailed joinery without flipping the workpiece.

Capacity And Headroom

The saw weighs 24.3 lb on a cast aluminum base measuring 22.44 by 18.11 by 20.47 inches, so it moves between job sites but stays stable during long sessions. The 255 mm blade and 17.72 inch width handle standard trim and decking boards comfortably. Very wide crown moulding or thick hardwood beams may exceed the maximum cutting depth.

Highlights

  • LED guide projects clear cut lines for accurate alignment
  • 15 A motor delivers 2800 W straight-cut power at 5000 RPM
  • 60-tooth 255 mm blade cuts wood and composite decking
  • Cast aluminium base weighs 11.0 kg for easier transport
  • Left bevel tilts 0-45° for angled joinery and frames

Specifications

TypeOther Appliances
Width17.72

Questions about this item

How much bench space does the 22.44 in long by 18.11 in wide cast aluminum base need?

The saw footprint is 22.44 in long by 18.11 in wide; allow extra clearance on each side for material support and the 0-45° bevel swing.

What is the correct way to mount the 10 in 60-tooth blade so the 15 A motor runs at 5000 RPM?

Unplug the saw, remove the arbor bolt with the supplied wrench, place the 60-tooth blade with teeth pointing down, retighten the bolt securely, then verify the LED guide aligns with the kerf before cutting.

When should the 60-tooth blade be replaced on a 15 A 5000 RPM miter saw?

Replace the 10 in 60-tooth blade when cuts become rough, the motor labours, or carbide tips show chips; a sharp blade keeps the 15 A motor at 5000 RPM without overload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.