VEVOR
VEVOR CL-750-M2 Specialty Appliance 1560 RPM 4000 CFM Blue
Portable carpet dryer with 4000 CFM airflow, three adjustable angles, and a 24 ft power cord for versatile drying
- TypeOther Appliances
- Width16.54
- 1560 RPM motor delivers 4000 CFM airflow for rapid drying
- Three adjustable angles at 0°, 20° and 90° direct air where needed
- 24 ft power cord provides 7.5 m reach across large spaces
- PP housing weighs 13.3 kg for stable yet portable operation
- Built-in timer and three-speed control match output to the task
Portable Floor Blower CL-750-M2
The VEVOR CL-750-M2 is a portable air mover built for drying carpets, floors and wet surfaces in homes, workshops or commercial sites. It delivers 4000 CFM airflow at 1560 RPM to accelerate evaporation after cleaning, leaks or flooding. The unit suits janitorial crews, restoration jobs and anyone needing rapid spot cooling or ventilation.
Three Angles Timer and Three Speeds
Adjustable blowing angles of 0°, 20° and 90° let you direct air horizontally across floors, upward toward ceilings or downward into sub-floors. A built-in timer allows unattended operation while three speed settings match airflow to the task, from gentle circulation to maximum drying power. The 24 ft power cord reaches distant outlets without an extension lead.
Polypropylene Housing Stackable Design
The blue polypropylene shell weighs 13.3 kg and measures 490 x 400 x 480 mm, making it light enough to carry between rooms yet stable during vibration. Units stack for compact storage on shelves or in service vehicles. No mounting hardware is included; the blower sits securely on its rubber feet for floor-level use.
Highlights
- 1560 RPM motor delivers 4000 CFM airflow for rapid drying
- Three adjustable angles at 0°, 20° and 90° direct air where needed
- 24 ft power cord provides 7.5 m reach across large spaces
- PP housing weighs 13.3 kg for stable yet portable operation
- Built-in timer and three-speed control match output to the task
Specifications
| Type | Other Appliances |
|---|---|
| Width | 16.54 |
Questions about this item
How often should the motor bearings on the CL-750-M2 be lubricated or replaced?
The motor is sealed and does not require bearing lubrication; if abnormal noise develops after long use, the entire motor assembly would need professional service.
At 4000 CFM on the highest speed, will the 1560 RPM motor overheat during continuous 24-hour operation?
The unit is built for sustained commercial drying; the motor housing and vents are sized to dissipate heat at full 1560 RPM output without thermal shutdown.
What is the noise level in decibels when the blower runs all day at the 90-degree angle?
At maximum speed the blower produces a noticeable airflow roar typical of 4000 CFM movers; lower speed settings reduce both airflow and sound for quieter all-day use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



