VEVOR
VEVOR CIBT2424N Ice Bin 79.9 Qt Sliding Lid Stainless Steel
Stores 79.9 quarts of ice in a 24 by 24 inch stainless steel chest with a sliding lid and polyurethane insulation
- TypeOther Appliances
- 9 Qt capacity handles high-volume service periods
- Polyurethan insulation keeps ice solid for 24 hours
- Sliding lid opens without extra clearance space
- 24 x 24 x 33 in footprint fits standard bar counters
- NSF certified for commercial food-service compliance
79.9 Qt Stainless Ice Bin
The VEVOR CIBT2424N is a commercial-grade ice bin built from stainless steel with a 79.9 Qt maximum capacity. Polyurethan insulation provides 24-hour cold retention for high-volume service. A sliding lid allows quick access while minimising cold-air loss. The unit ships with legs, crossbars, a drain assembly and mounting hardware for immediate setup.
Bars, restaurants and catering operations
Venues that need a large, stationary ice reserve with long hold times will benefit from the 75.7 L interior and sliding lid design. Mobile catering teams or sites with tight doorways should verify the 610 mm width and 850 mm height before ordering. Outlets requiring built-in refrigeration or a hinged lid must consider alternative equipment.
Sliding lid on a 610 mm footprint
The defining specification is the sliding lid combined with a 610 x 610 mm exterior footprint, which dictates both counter clearance and service workflow. Confirm the 20.43 x 22.05 in inner dimensions match your ice-volume needs and that the 51.59 lb weight suits your floor load limits.
Highlights
- 9 Qt capacity handles high-volume service periods
- Polyurethan insulation keeps ice solid for 24 hours
- Sliding lid opens without extra clearance space
- 24 x 24 x 33 in footprint fits standard bar counters
- NSF certified for commercial food-service compliance
Specifications
| Type | Other Appliances |
|---|
Questions about this item
Does the sliding lid design limit how much of the 79.9 Qt capacity I can actually use?
No, the sliding lid runs the full length of the 20.43 in by 22.05 in opening, so the entire 75.7 L interior volume remains accessible without a hinged lid swinging into the bin.
What floor footprint must I clear for the 24.02 in by 24.02 in cabinet plus the four included legs?
The unit sits on four legs that bolt to the 610 mm square base, so you need a clear 24.02 in by 24.02 in floor area plus a few inches for the drain assembly at the rear.
Which step in the assembly sequence is most often missed when fitting the drain assembly and crossbars?
Install the two crossbars and four legs with the 10 hex socket screws before placing the bin upright; the drain assembly threads into the bottom fitting and cannot be reached once the unit is standing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



