We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver galvanised steel chainsaw mill with 9 ft aluminium guide rail

VEVOR

VEVOR Chainsaw Mill & 9ft Rail Guide System 14-36in Bar

SKU CH-797H-413CW

Portable chainsaw mill and 9 ft aluminium rail guide cut boards from 14 to 36 in bars up to 11.81 in thick

  • TypeOther Appliances
  • Width11.22
  • Cuts boards from 14 to 36 inch bars
  • 9 ft aluminum rail guides straight, accurate cuts
  • Galvanised steel frame resists rust for long life
  • Anti-loosening nuts and large washers lock everything tight
  • Weighs 26.5 lbs with included tool bag and gloves

Portable Sawmill for Woodworkers and Carpenters

This chainsaw mill and rail guide system converts a standard chainsaw into a portable sawmill for on-site lumber processing. It accepts guide bars from 14 to 36 inches, allowing operators to mill logs into boards or beams directly where the tree falls. The package includes the mill attachment, a nine-foot aluminum guide rail, assembly hardware, kerf wedges, a tool bag and two pairs of gloves.

Galvanised Steel Frame with Aluminium Rail

The mill body uses galvanised steel pipes with electroplated and spray-painted finishes for rust resistance. The 108.1 by 9.5 by 4.3 inch guide rail is built from aluminium and iron with an oxidised surface for wear resistance. Anti-loosening nuts and large washers secure the joints, keeping the chainsaw gliding steadily along the rail. Total system weight is 26.5 lbs.

Precision Scales and Positioning Holes

Air-gun carved scales provide clear thickness references from 0.2 up to 11.81 inches, while dedicated positioning holes lock the saw to prevent lateral shake during the cut. This mechanical stability helps maintain consistent board thickness over the full 915 millimetre rail length. The kit suits users who need repeatable cuts without a stationary band-mill; it does not serve buyers who require automated feed or hydraulic log handling.

Highlights

  • Cuts boards from 14 to 36 inch bars
  • 9 ft aluminum rail guides straight, accurate cuts
  • Galvanised steel frame resists rust for long life
  • Anti-loosening nuts and large washers lock everything tight
  • Weighs 26.5 lbs with included tool bag and gloves

Specifications

TypeOther Appliances
Width11.22

Questions about this item

How do I mount the chainsaw mill onto the 9ft rail so the bar slides without binding?

Slide the mill brackets onto the 108.1 in aluminum rail, align the positioning holes, then tighten the anti-loosening nuts with the large washers. The step most people skip is re-checking parallel alignment after the first two cuts.

Which parts of this 12 kg kit will wear out first and need replacing?

The saw kerf inserts and the guide-rail contact edges wear fastest; the kit includes one spare pair of kerfs. Galvanized steel pipes and the oxidized aluminum rail resist rust, so structural pieces rarely need replacement.

What maximum log thickness can I cut continuously before the mill frame flexes?

The mill is rated for 0.2-11.81 in cutting thickness. In practice, sustained cuts near the 11.81 in limit on dense hardwood will reveal frame flex first, so plan extra supports for slabs over 8 in thick.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.