VEVOR
VEVOR CH-70 Hydraulic Hole Puncher 35T 109mm 4 dies
Punches 10.5 mm to 20.5 mm holes in iron, copper, aluminium and stainless steel using 35 tonne hydraulic force and a 109 mm throat depth
- TypeOther Appliances
- 35-tonne force punches 10 mm iron plate
- 109 mm throat depth reaches deep workpieces
- Four die sizes from 10.5 mm to 20.5 mm
- High-carbon tungsten steel dies resist wear
- Alloy steel frame handles 350 kN pressure
Hydraulic Hole Puncher 35T
The VEVOR CH-70 is a hydraulic hole puncher rated at 35T or 350KN punching force with a 109mm throat depth. It includes four die pairs sized 10.5mm, 13.8mm, 17.5mm and 20.5mm for precise holes in iron plate, copper bar, aluminium and stainless steel. The tool is built from premium alloy steel for high strength and toughness.
Check hydraulic pump compatibility
This puncher requires a separate hydraulic pump to operate, which is not included in the package. Verify that your pump can deliver sufficient pressure to achieve the rated 350KN force. Ensure the workpiece material and thickness fall within the specified limits: iron plate 3-10mm, copper or aluminium 3-12.7mm, stainless steel 3-8mm.
Alloy steel construction with dust cap
The heavy-duty frame uses premium alloy steel for durability during repetitive punching tasks. A plastic cap protects the punching mechanism from dust and debris when the tool is not in use. The package includes a concave pressing plate, four dies with one pre-installed, and an Allen wrench for die changes.
Highlights
- 35-tonne force punches 10 mm iron plate
- 109 mm throat depth reaches deep workpieces
- Four die sizes from 10.5 mm to 20.5 mm
- High-carbon tungsten steel dies resist wear
- Alloy steel frame handles 350 kN pressure
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What comes in the box and what must I supply myself?
The package includes the puncher, a concave pressing plate, four dies (one pre-fitted) and an Allen wrench. A hydraulic pump is required for operation and is not included.
Which die size should I select for my material?
Four die pairs are supplied: 10.5 mm, 13.8 mm, 17.5 mm and 20.5 mm. Choose the die that matches the hole diameter you need for the iron plate, copper bar, aluminum or stainless steel you are punching.
What does the 35-tonne force mean when I am punching 10 mm iron plate?
The 350 kN (35 T) force lets the tool punch iron plate up to 10 mm thick, copper or aluminum up to 12.7 mm and stainless steel up to 8 mm, all within the 109 mm throat depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
