We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Heavy cast-iron motorized wire stripper with 11 stripping channels and manual crank handle

VEVOR

VEVOR BXJDD370 specialty appliance motorized wire stripper 370 W 88 ft/min 0.06-1.57 in 11 channels

SKU CH-7BJC-P5G9P MPN BXJDD370

Motorised wire stripper processes copper cable at 88 ft/min with a 370 W motor and 11 channels for 0.06–1.57 in diameters

  • TypeOther Appliances
  • Width13.39
  • 370 W motor strips at 88 ft/min for fast copper recycling
  • 11 channels handle 0.06 in to 1.57 in wire diameters
  • Electric or manual crank operation keeps you working during power cuts
  • Cast-iron construction weighs 80.7 lbs for stable bench mounting
  • Includes 10 blades, spanner, gloves and manual crank ready to use

Purpose-built wire stripper

The VEVOR BXJDD370 is a motorised cable stripping machine rated at 370 W with a feed rate of 88 ft/min. It accepts conductors from 0.06 in to 1.57 in across 11 channels and includes a manual crank for operation during power loss. Designed for recycling yards and cable manufacturers processing high volumes of copper scrap.

Upgrade from hand tools or slower units

Replaces manual knives, handheld strippers or lower-speed bench machines when throughput becomes the bottleneck. The jump is worth it when daily cable volume justifies a 370 W motor and 11 preset channels that eliminate constant blade changes. Not suited for occasional hobby use or very fine wires below the stated minimum gauge.

Sustained stripping performance

Cast-iron construction and a gear-driven gearbox maintain the 88 ft/min rate during continuous shifts without overheating. Dual electric and manual drive ensures the machine keeps producing even if mains power fails. The 10-blade array across 11 channels handles mixed hard-cover, soft-cover and multi-conductor cables in a single pass.

Highlights

  • 370 W motor strips at 88 ft/min for fast copper recycling
  • 11 channels handle 0.06 in to 1.57 in wire diameters
  • Electric or manual crank operation keeps you working during power cuts
  • Cast-iron construction weighs 80.7 lbs for stable bench mounting
  • Includes 10 blades, spanner, gloves and manual crank ready to use

Specifications

TypeOther Appliances
Width13.39

Questions about this item

What bench space is needed for the 24.4 in by 11.0 in footprint of the BXJDD370?

Allow at least 24.4 in length by 11.0 in width on a sturdy bench; the unit stands 14.9 in tall and weighs 80.7 lbs, so the surface must support that load without flex.

How do I set up the BXJDD370 for electric operation, and what step is often missed?

Connect to a 110 V 60 Hz supply, fit the correct blade for the wire size, then adjust the blade depth using the 8 mm spanner before starting — skipping the depth adjustment is the common error.

Which parts of the BXJDD370 will need replacement over time?

The 10 blades and the valve cap are wear items; keep the 8 mm spanner handy for blade changes and check blade sharpness regularly to maintain clean strips across the 0.06–1.57 in range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.