We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel bucket tooth bar 72 inches wide with nine curved teeth bolted on

VEVOR

VEVOR Bucket Tooth Bar 72 in 9 Teeth 4560 lbs

SKU CH-BW81-73JCV

A 72-inch bolt-on tooth bar with nine curved shanks handles 4560 lbs for loader and skid-steer buckets

  • TypeOther Appliances
  • Width12.99
  • Curved 230 shank digs efficiently with 4560 lbs capacity
  • Bolt-clamp design installs quickly on most loader buckets
  • Automated welding gives joint strength for heavy use
  • Nine teeth cover 72 inch width for wide cuts
  • 5 in bucket thickness fits standard equipment

What the 72-inch tooth bar does

The VEVOR bucket tooth bar spans 72 inches and carries nine curved shanks rated for 4560 lbs of load-bearing capacity. It bolts onto a loader or skid-steer bucket to improve penetration in soil excavation while protecting the bucket edge.

Behaviour under sustained digging load

Fully automated welding joins every shank and plate without the fractures common in manual welds, so the bar holds its shape through repeated high-intensity cycles. The bolt-clamping design keeps the connection shake-free even when the bucket is fully loaded to the 4560 lbs limit.

Compatibility checks before ordering

Verify that your bucket edge measures 0.5 in or 12.7 mm thick, because the clamps are sized for that dimension. Confirm the mounting width can accept a 70.9 in overall length and that the 77.8 lbs net weight is within your loader’s attachment rating.

Highlights

  • Curved 230 shank digs efficiently with 4560 lbs capacity
  • Bolt-clamp design installs quickly on most loader buckets
  • Automated welding gives joint strength for heavy use
  • Nine teeth cover 72 inch width for wide cuts
  • 5 in bucket thickness fits standard equipment

Specifications

TypeOther Appliances
Width12.99

Questions about this item

Does the 4560 lbs load-bearing capacity change after the bar has been bolted on and run all day?

The 4560 lbs capacity is a structural rating of the steel bar itself; bolting it on does not alter that figure, and no heat or power source is involved.

What bucket thickness must my loader already have for the bolt-on design to fit?

The bar is made for a bucket edge of 0.5 in or 12.7 mm; thicker or thinner edges will not clamp securely.

Will the 70.9 in overall width and 9 teeth match the pin spacing on my older 72 in bucket?

The bar spans 70.9 in with nine teeth and uses the supplied pins and bolts, so it aligns with standard 72 in buckets that accept bolt-on tooth bars.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.