We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel bucket tooth bar 60 inches wide with seven curved teeth bolted on

VEVOR

VEVOR Bucket Tooth Bar 60'' 7 Teeth 4560 lbs

SKU CH-K858-4FEAM

A 60-inch bolt-on tooth bar with seven curved shanks adds 4560 lbs digging capacity to loader buckets up to .5 inch thick

  • TypeOther Appliances
  • Width12.99
  • Curved 230 shank digs efficiently with 4560 lbs capacity
  • Bolt-clamp design fits most loaders for secure attachment
  • Automated welding gives strong joints for high-intensity use
  • Seven teeth cover 59.1 in width for broad excavation
  • 62 lb bar includes pins, bolts, screws and nuts

60-Inch Bucket Tooth Bar

This 60-inch bucket tooth bar attaches to loader, tractor or skid-steer buckets using a bolt-on design. Seven curved shanks rated at 230 each deliver a combined load-bearing capacity of 4560 lbs for soil excavation and bucket protection. Fully automated welding secures every joint against fracture during high-intensity use. The unit weighs 62 lbs and measures 59.1 by 11 by 2.8 inches overall.

Bucket Thickness and Mounting Check

Verify that your bucket edge thickness does not exceed 0.5 inch (12.7 mm) so the clamping bolts can engage fully. Confirm the bucket width can accommodate the 11-inch bar depth and 59.1-inch working length without interference. Ensure you have basic hand tools to install the supplied pins, hex bolts, screws and nuts for the rivet-and-bolt fastening method described.

Suited for Heavy Digging, Not Light-Duty Buckets

Contractors and operators who need maximum penetration in compacted ground will benefit from the curved-shank geometry and 4560 lbs rating. Buyers with thinner bucket lips, narrower attachments or only occasional light digging should look at simpler tooth options that impose less weight and clamping force on the host equipment.

Highlights

  • Curved 230 shank digs efficiently with 4560 lbs capacity
  • Bolt-clamp design fits most loaders for secure attachment
  • Automated welding gives strong joints for high-intensity use
  • Seven teeth cover 59.1 in width for broad excavation
  • 62 lb bar includes pins, bolts, screws and nuts

Specifications

TypeOther Appliances
Width12.99

Questions about this item

Does the VEVOR 60'' bucket tooth bar ship with all mounting hardware or do I need to source pins and bolts separately?

The package includes 7 pins, 7 hex flat end bolts, 8 screws and 8 nuts so the bar can be bolted to the bucket without extra parts.

The bar is listed at 60'' with 7 teeth and a 4560 lbs rating — how do I know this size matches my loader bucket?

The bar fits buckets up to 0.5 in thick and spans 59.1 in overall width; check your bucket lip thickness and width against those figures before ordering.

What does the 4560 lbs load-bearing figure mean when the bar is bolted onto a skid-steer in daily digging?

It is the maximum vertical load the 7-tooth bar can sustain when properly bolted to a compatible bucket, based on the 230 curved shank design and automated welds.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.