We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow cylindrical 10 inch portable ventilator with black frame, carrying handle and 9.8ft power cord

VEVOR

VEVOR BTF-25 10" Portable Ventilator 350W 1942CFM

SKU CH-4QFM-C5TW7

A 10-inch portable ventilator moves 1942 CFM at 66 dB with a 9.8 ft power cord for workshop dust and smoke extraction

  • TypeOther Appliances
  • Width15.16
  • Moves 1942 CFM of air for rapid dust and smoke removal
  • 350 W motor spins at 2850 rpm delivering strong exhaust flow
  • Operates at 66 dB keeping workplace noise manageable
  • 8 ft cord on AC 120 V 60 Hz power allows flexible placement
  • Weighs 28.88 lbs with foot pads for stable portable use

10" Portable Ventilator 1942CFM

The VEVOR BTF-25 is a 10-inch portable ventilator rated at 1942 CFM for moving large volumes of air. It suits workshops, garages or job sites where dust, smoke or fumes must be extracted quickly. The unit runs on standard AC 120 V 60 Hz mains power and includes a 9.8 ft cord without a charging plug. Buyers needing battery operation or a lower-profile form factor should look elsewhere.

Thermals Noise Power Draw

The motor draws 350 W at 2850 rpm and produces a stated 66 dB noise level during operation. A cylindrical metal housing acts as the heat path, so the exterior becomes warm after extended use. The 9.8 ft power cord allows placement away from the outlet without an extension lead. No variable-speed control or thermal shutdown feature is described in the data.

Included Foot Pads Hardware Manual

The box contains the ventilator, a user manual, two foot pads and eight M8 × 20 screws. Foot pads reduce vibration on hard floors and the screws allow optional mounting to a bracket or duct flange. No ducting, speed controller or filter media are supplied, so buyers must source those separately if the application requires them.

Highlights

  • Moves 1942 CFM of air for rapid dust and smoke removal
  • 350 W motor spins at 2850 rpm delivering strong exhaust flow
  • Operates at 66 dB keeping workplace noise manageable
  • 8 ft cord on AC 120 V 60 Hz power allows flexible placement
  • Weighs 28.88 lbs with foot pads for stable portable use

Specifications

TypeOther Appliances
Width15.16

Questions about this item

How do I install the BTF-25 ventilator and what step is commonly missed?

Place the unit on a flat surface, attach the two foot pads, then secure the housing with the eight M8 × 20 screws; the step often missed is fitting the foot pads before tightening the screws.

What maintenance or replacement will the BTF-25 need over time?

Periodically clean the intake and exhaust grilles to maintain the 1942 CFM airflow; the 350 W motor uses sealed bearings so no lubrication is required, but the 9.8 ft power cord should be inspected for wear.

What limit appears first during sustained use of the BTF-25?

Continuous operation at 2850 rpm produces 66 dB noise and motor heat; the thermal protection will trip before any airflow drop, so allow cool-down breaks during extended runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.