We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel countertop soft serve machine with dual hoppers and LCD panel

VEVOR

VEVOR BQL-7220T 3-Flavor Soft Serve Ice Cream Maker 20L/h 1800W

SKU CH-JNAC-5NR4M

Produces 20 litres of soft serve per hour with three flavours, twin 4-litre hoppers, 15-minute initial freeze and LCD auto-clean control

  • Produces 20 L of soft serve every hour
  • Initial freeze in 15 minutes then 6 minutes per batch
  • LCD panel shows time, quantity, auto clean and pre-cool
  • Two 4 L stainless-steel hoppers feed three flavor outputs
  • Runs at 66 dB within 5 to 32 °C ambient range

Three-Flavour Soft-Serve Output

The VEVOR BQL-7220T is a countertop commercial ice cream maker that dispenses two individual flavours and a combined swirl from twin hoppers. It targets cafés, snack bars and small restaurants that need a self-service or staff-served soft-serve option without a floor-standing footprint. The machine runs on a standard single-phase supply and fits on a sturdy bench at typical working height.

20 L/h Throughput With 15-Minute First Freeze

Twin 4 L hoppers feed dual 1.6 L freezing cylinders to deliver up to 20 L of finished product per hour. The initial freeze takes roughly 15 minutes and subsequent cycles drop to 6 minutes, supporting a steady flow of 80 g servings. Output tapers when ambient temperature approaches the 32 °C limit or during prolonged peak demand, so very high-volume venues may need a second unit. The 66 dB noise level is noticeable in a quiet dining room.

Stainless Steel Build With Gravity-Fed Hoppers

The exterior uses grade 201 stainless steel while the hoppers are grade 304 for direct food contact. Gravity-fed hoppers sit above the cylinders, so the operator simply pours mix in and the machine draws it down without pumps. The LCD panel groups auto-precool, one-touch clean and timer functions, reducing daily set-up steps. At 85 kg the unit needs a permanent position and two people to place it; the supplied kit includes seals, decorating tips, a cone holder and tools for routine assembly.

Highlights

  • Produces 20 L of soft serve every hour
  • Initial freeze in 15 minutes then 6 minutes per batch
  • LCD panel shows time, quantity, auto clean and pre-cool
  • Two 4 L stainless-steel hoppers feed three flavor outputs
  • Runs at 66 dB within 5 to 32 °C ambient range

Specifications

No published specifications for this item yet.

Questions about this item

Will the 85 kg weight and 1800 W power draw require a dedicated circuit or reinforced bench?

The unit weighs 85 kg and draws 1800 W, so a sturdy level surface and a circuit rated for the load are recommended; consult an electrician for local code requirements.

How can I verify the LCD panel shows the machine is ready after the initial 15-minute freeze?

The LCD panel displays production time and remaining quantity; when the first batch finishes in about 15 minutes the readout will indicate ready status and the dispense handles can be pulled.

Which wear items like O-rings and seals are included versus what consumables must be purchased separately?

The box includes one large O-ring, two plunger O-rings, one plunger T-seal, two one-way air valves, two decorating tip seals and petroleum jelly; mix ingredients, cones beyond the single sample cone and sanitiser are not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.