We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium monoblock amplifier with side fins, 6.9 by 8.9 by 3.0 inches, silver finish, wired remote knob included

VEVOR

VEVOR BP-1500.1D Monoblock Car Amplifier 1500W RMS Class D 1/2/4 Ohm

SKU CH-5S2D-0NZ56

Class D monoblock amplifier delivers 1500W RMS at 1 ohm with 1/2/4 ohm stability and includes a 16.4 ft remote bass controller

  • TypeOther Appliances
  • Deep, precise bass from 1500W RMS Class D power
  • Real-time bass adjustment via 16.4 ft remote volume controller
  • Flexible 1, 2, 4 ohm stability suits single or multiple subwoofers
  • Clean signal with 77 dB SNR at maximum output
  • Compact aluminium alloy chassis measuring 6.9 x 8.9 x 3.0 in

Monoblock amplifier for high-power subs

The VEVOR BP-1500.1D is a Class D monoblock car amplifier rated at 1500W RMS into 1 ohm. It drives 12-inch or 15-inch subwoofers and multi-sub systems with deep extension and precise impact. The unit operates on a DC 9-16V range with a 14.4V rated voltage. Its aluminium alloy chassis measures 6.9 x 8.9 x 3.0 in and weighs 5.2 lbs.

Check electrical fit and impedance match

Verify your vehicle supplies DC 9-16V and that the alternator and wiring can sustain the amplifier's current draw at 14.4V. Confirm your subwoofer wiring presents a 1, 2, or 4 ohm load to match the stable impedance range. Ensure you have space for the 175 x 225 x 75 mm chassis and a secure mounting location for the included hardware.

Upgrades factory bass or smaller amps

This amplifier replaces a factory head-unit output or a lower-power mono amp when you need 1500W RMS for large subwoofers. The jump is worth it when your current system cannot drive 12-inch or 15-inch drivers cleanly at high output. The 16.4 ft remote level cable lets you tune bass from the driver's seat without re-wiring.

Highlights

  • Deep, precise bass from 1500W RMS Class D power
  • Real-time bass adjustment via 16.4 ft remote volume controller
  • Flexible 1, 2, 4 ohm stability suits single or multiple subwoofers
  • Clean signal with 77 dB SNR at maximum output
  • Compact aluminium alloy chassis measuring 6.9 x 8.9 x 3.0 in

Specifications

TypeOther Appliances

Questions about this item

Does the VEVOR BP-1500.1D include the wiring kit, or do I need to buy power and speaker cables separately?

The package contains the amplifier, a wired volume controller with a 16.4 ft cable, four mounting screws, a desiccant pack and a user manual. Power wire, ground wire, RCA cables and speaker wire are not included.

Should I run the BP-1500.1D at 1 ohm, 2 ohm or 4 ohm for my subwoofer setup?

The amplifier is stable at 1, 2 and 4 ohms. Its 1500W RMS rating is specified at 1 ohm; power will be lower at 2 or 4 ohms. Match the impedance to your subwoofer's voice-coil configuration and the total load you want to present.

What does the 1500W RMS at 1 ohm figure mean once the amp is installed in my car?

At the rated 14.4 V supply and a 1 ohm load, the Class D monoblock can deliver 1500W continuous power to the subwoofer with a frequency response of 20 Hz to 25 kHz and a signal-to-noise ratio of 77 dB at maximum output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.