We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel winch mount with square tube and base plate, U-bolts and hardware included

VEVOR

VEVOR Boat Winch Mount U-Bolts 3×3-4 in Tongue 1901

SKU CH-0725-GJTFK

A galvanised steel winch stand with U-bolts that clamps to 76×76-101 mm trailer tongues and includes mounting hardware

  • TypeOther Appliances
  • Width11.42
  • Fits 3×3–4 in trailer tongues with supplied U-bolts
  • 3 mm galvanised steel square tube resists corrosion
  • 5×10 in base plate spreads winch load
  • 42 lb unit includes wrench and mounting hardware
  • Model 1901 rated for 7.45 kg overall weight

VEVOR Boat Winch Mount 1901

The VEVOR Boat Winch Mount 1901 is a galvanised steel stand built to hold a winch on trailer tongues measuring three by three to four inches. It suits boat owners who need a fixed mounting point for launching and retrieving small to medium craft. The square tube measures three millimetres thick and extends thirty-four inches high.

Replaces worn or undersized winch stands

This mount replaces a damaged or lower-capacity stand when the existing hardware no longer aligns with the trailer tongue or shows corrosion. The upgrade is worth it when the current base plate has bent or the U-bolts have stretched, causing the winch to shift under load. The five by ten inch base plate distributes force across a wider footprint than many original brackets.

Bolt-on installation with included hardware

Installation uses two M12 square U-bolts, four M12 lock nuts, four M16 flat washers and four M16 spring washers supplied in the box. A seventeen to nineteen millimetre open-end hex wrench is also provided so no extra tools are required. The most common issue is misaligned U-bolt holes on older tongues, which can prevent the lock nuts from seating fully.

Highlights

  • Fits 3×3–4 in trailer tongues with supplied U-bolts
  • 3 mm galvanised steel square tube resists corrosion
  • 5×10 in base plate spreads winch load
  • 42 lb unit includes wrench and mounting hardware
  • Model 1901 rated for 7.45 kg overall weight

Specifications

TypeOther Appliances
Width11.42

Questions about this item

What trailer tongue sizes will the 76 mm wide U-bolts clamp onto?

The U-bolts fit square tongues from 76 mm up to 101 mm wide.

Which hardware must be tightened in the correct sequence to prevent the 863 mm column from shifting?

Snug the four M12 lock nuts evenly, then torque the M16 flat and spring washers in a cross pattern.

When should the galvanised square tube and its cover be inspected for rust?

Check the 3 mm tube and cover after each salt-water season and re-coat any scratched areas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.