VEVOR
VEVOR BL-W3024V-L 3000W 24V Pure Sine Wave Inverter Charger
A 3000W pure sine wave inverter charger converts 24V DC to 120V AC with five operating modes and a 32.8 ft remote cable
- Reliable power for sensitive devices from 3000W pure sine wave output
- Flexible operation with five selectable modes including grid and battery priority
- Works with LiFePO4, lithium-ion, AGM and lead-acid 24V battery systems
- Convenient monitoring from up to 32.8 ft away using wired remote
- Handles heavy start-up loads with 9000W peak surge capacity
Pure Sine Wave Inverter Charger
This 3000 W pure sine wave inverter charger converts 24 V DC battery power to 120 V AC for sensitive electronics. It includes an LCD display and a 32.8 ft remote cable for convenient monitoring. The unit weighs 39.53 lb and ships with battery connection cables and a manual.
Suits off-grid, RV, boat and home backup systems
The five operating modes cover unattended, grid priority, battery priority, energy-saving and generator use. Adjustable charging currents of 50 A, 35 A, 25 A and 15 A match LiFePO4, lithium-ion, AGM, sealed and flooded lead-acid banks. Buyers who need a different DC input voltage or continuous output above 3000 W cannot use this unit.
DC 24 V input voltage
The inverter only accepts a 24 V battery bank, so the entire installation must be built around that voltage. Peak surge capacity reaches 9000 W for motor starts, while each AC outlet should stay below 1.2 kW. This single voltage requirement decides whether the charger fits the project.
Highlights
- Reliable power for sensitive devices from 3000W pure sine wave output
- Flexible operation with five selectable modes including grid and battery priority
- Works with LiFePO4, lithium-ion, AGM and lead-acid 24V battery systems
- Convenient monitoring from up to 32.8 ft away using wired remote
- Handles heavy start-up loads with 9000W peak surge capacity
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the BL-W3024V-L inverter is operating correctly after installation?
Check the LCD display for real-time voltage, frequency and load readings; the remote controller lets you verify the active mode — Unattended, Grid Priority, Battery Priority, Energy-Saving or Generator — and ensure the output stays within the 1.2 kW per outlet guideline.
What accessories are included and what must be purchased separately?
The box contains the inverter charger, a user manual, a 32.8 ft remote cable, a metal cover for the remote controller and two battery connection cables; 24 V batteries (LiFePO4, lithium-ion, AGM, sealed or flooded lead-acid) are not included and must be bought separately.
Which charging current setting — 15 A, 25 A, 35 A or 50 A — should I select for my battery bank?
Match the setting to your battery manufacturer’s recommended charge rate; 15 A suits smaller AGM or flooded banks, 25 A to 35 A fits typical lithium-ion or LiFePO4 packs, while 50 A is for large-capacity banks that can accept high current without overheating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
