We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop belt and disc sander with cast aluminium tables and rubber feet

VEVOR

VEVOR BD4803 6" Disc & 4"×36" Belt Sander 5A Induction Motor

SKU CH-THRQ-0A82T

Combines a 6" disc and 4"×36" belt driven by a 5A induction motor with adjustable tables and dust extraction

  • TypeOther Appliances
  • Width20.47
  • Powerful 5.0 AMP induction motor delivers 3450 RPM disc speed for fast material removal
  • Belt tilts 0 to 90 degrees enabling horizontal and vertical sanding angles
  • Cast aluminium worktable tilts 0 to 45 degrees for comfortable operating positions
  • Heavy 36.3 lb steel base with rubber pads stays stable during use
  • 5 inch dust port connects to vacuum for cleaner workspace

Professional belt and disc sander

The VEVOR BD4803 combines a six-inch disc sander with a four-by-thirty-six-inch belt sander driven by a five-amp induction motor. It suits woodworkers and metalworkers who need a single bench-top machine for stock removal and finishing.

Capacity and headroom

The disc spins at three thousand four hundred fifty rpm while the belt runs at two thousand one hundred sixty rpm, providing steady power for material removal across the full width of the belt and the face of the disc. The belt tilts from zero to ninety degrees and the cast aluminium work tables tilt to forty-five degrees, so the unit handles horizontal, vertical and angled setups without needing extra fixtures.

Build integration

A steel base with non-slip rubber pads keeps the sander stable on any bench, and the three-and-a-half-inch dust port accepts a standard vacuum hose for chip extraction. The package includes both work tables, an indexing disc assembly and a 120-grit sanding disc so the machine is ready to run on a standard one-hundred-twenty-volt circuit.

Highlights

  • Powerful 5.0 AMP induction motor delivers 3450 RPM disc speed for fast material removal
  • Belt tilts 0 to 90 degrees enabling horizontal and vertical sanding angles
  • Cast aluminium worktable tilts 0 to 45 degrees for comfortable operating positions
  • Heavy 36.3 lb steel base with rubber pads stays stable during use
  • 5 inch dust port connects to vacuum for cleaner workspace

Specifications

TypeOther Appliances
Width20.47

Questions about this item

Will the 3.5" dust port fit the vacuum hose I already use in my workshop?

The dust port outer diameter is 3.5" (63.5 mm); most standard shop-vac hoses use a 2.5" or 4" cuff, so you will likely need a stepped adapter to connect your existing hose securely.

How can I verify the motor is reaching the correct 3450 rpm disc speed after assembly?

With the machine running unloaded, hold a non-contact tachometer against the disc centre; a reading close to 3450 rpm confirms the induction motor is operating at its rated speed.

Does the box include the 120# sanding disc and 4" x 36" belt, or must I buy them separately?

The package ships with one 6" 120# sanding disc and one 4" x 36" sanding belt already fitted, plus the disc worktable, belt worktable, and indexing disc assembly — no extra abrasives are required to start working.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.