We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black carbon-steel C-press kit in hard case with 25 pieces including adapters and jack screw

VEVOR

VEVOR Ball Joint Press Kit 25 pcs C-Press 2WD 4WD

SKU CH-9EKA-WYWWS

A 25-piece carbon-steel ball-joint press kit with C-clamp hardness HRC32-38 and screw hardness HRC28-36, covering most 2WD and 4WD vehicles with Dana 28, 30, 35, 44 or 60 front axles

  • TypeOther Appliances
  • Width4.13
  • Fits most 2WD and 4WD vehicles including Dana 28, 30, 35, 44, 60 axles
  • C-clamp hardness HRC32-38 and jack screw HRC28-36 withstand high-stress pressing
  • Carbon steel construction with black coating resists water, corrosion and rust
  • 25-piece kit includes press, jackscrew, 9 adapters, cups, tubes and socket in case
  • Compact case measures 520 × 430 × 90 mm for organised storage and transport

Ball Joint Press Kit 25 pcs

This 25-piece kit is built for professional mechanics and serious DIYers who service front suspension on most 2WD and 4WD vehicles. It covers applications with Dana 28, 30, 35, 44 and 60 front axles across Ford, General Motors, Dodge, IHC and Jeep platforms. The C-frame press, jack screw and assorted adapters handle both removal and installation in a single case. Buyers who only need occasional brake or tyre work will not use the specialised cups and receiving tubes.

Heat-treated carbon steel construction

The C-clamp reaches HRC32-38 hardness and the jack screw reaches HRC28-36 through multi-process heat treatment, giving the strength to press stubborn joints without bending. Black coating on all components resists water, corrosion and rust during shop use. The kit weighs 27.8 lbs and packs into a 20.5" × 16.9" × 3.5" suitcase for storage. Shops without a heavy press frame or hydraulic ram will find the manual screw operation slower on severely seized joints.

Upgrade from basic pickle forks

This kit replaces improvised methods such as hammer-and-fork separation or undersized press tools that damage control arms. The nine adapters, dedicated install cup, seven receiving tubes and removal adapter match factory joint diameters precisely. The jump is worth it when you regularly service Dana axles or need to press new joints straight without distorting the housing. Technicians who only encounter pressed-in joints on rare occasions may not recoup the investment.

Highlights

  • Fits most 2WD and 4WD vehicles including Dana 28, 30, 35, 44, 60 axles
  • C-clamp hardness HRC32-38 and jack screw HRC28-36 withstand high-stress pressing
  • Carbon steel construction with black coating resists water, corrosion and rust
  • 25-piece kit includes press, jackscrew, 9 adapters, cups, tubes and socket in case
  • Compact case measures 520 × 430 × 90 mm for organised storage and transport

Specifications

TypeOther Appliances
Width4.13

Questions about this item

How do I install the C-press on a Dana 44 axle without bending the jack screw?

Use the correct receiving tube for the Dana 44, centre the C-clamp on the ball joint, and turn the jack screw slowly — its hardness is only HRC28-36 so sudden force can bend it.

Which parts of the 25-piece kit wear out first and need replacement?

The nine adapters and seven receiving tubes contact the joint directly; inspect them for deformation after each job and replace any that show cracking or rounded edges.

What is the first limit reached when pressing multiple ball joints in a row?

The jack screw hardness of HRC28-36 is lower than the C-clamp at HRC32-38, so the screw will yield or gall before the frame does under sustained heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.