We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
10-piece ball joint press kit in black carbon steel with C-clamp, jack screw, adapters and case

VEVOR

VEVOR Ball Joint Press Kit 10 pcs C-Press Tool

SKU CH-24Z1-RNE32

Ten-piece C-press kit removes and installs ball joints on most 2WD and 4WD vehicles with Dana 30 or 44 front axles

  • Width3.35
  • Fits most 2WD and 4WD vehicles including Dana 30 and 44 front axles
  • C-clamp hardness HRC32-38 and jack screw hardness HRC28-36 from multiprocess heat treatment
  • Carbon steel construction with black coating resists water corrosion and rust
  • 10-piece kit includes press jack screw suitcase and multiple adapters and receiving tubes
  • Compact case measures 14.2 by 11.2 by 2.8 inches for easy storage and transport

Universal 10-piece ball joint press kit

This 10-piece C-press kit removes and installs press-fit ball joints on most 2WD and 4WD vehicles, including 1/2 and 3/4 ton models with Dana 30 or 44 front axles. The set fits popular applications from Ford, General Motors, Dodge, IHC and Jeep. All components are made from heat-treated carbon steel with a black corrosion-resistant coating.

For DIYers and shops doing press-fit joint work

The kit suits technicians and home mechanics who need to service front suspension ball joints on compatible solid-axle vehicles. It is not for vehicles that use bolt-in ball joints or integrated control-arm assemblies. Buyers needing to service rear suspensions, kingpins or larger commercial truck axles should look at other tooling.

C-clamp hardness rated HRC32-38

The forged C-clamp frame is hardened to HRC32-38 while the jack screw reaches HRC28-36, giving the structural strength required to press joints on heavy-duty 4WD axles without bending. This hardness range is the key specification that determines whether the tool can handle the high loads encountered on 3/4 ton Dana 44 applications.

Highlights

  • Fits most 2WD and 4WD vehicles including Dana 30 and 44 front axles
  • C-clamp hardness HRC32-38 and jack screw hardness HRC28-36 from multiprocess heat treatment
  • Carbon steel construction with black coating resists water corrosion and rust
  • 10-piece kit includes press jack screw suitcase and multiple adapters and receiving tubes
  • Compact case measures 14.2 by 11.2 by 2.8 inches for easy storage and transport

Specifications

Width3.35

Questions about this item

What is the C-clamp opening width of 3.35 inches designed to clear?

The 3.35 inch opening fits over most 2WD and 4WD ball joints, including Dana 30 and 44 front axles on 1/2 and 3/4 ton trucks from Ford, GM, Dodge, IHC and Jeep.

Which adapter should be placed on the jack screw first when pressing out a joint?

Thread the jack screw through the C-frame, then fit the removal adapter onto the screw tip before positioning the receiving tube on the opposite side.

How should the carbon steel components be stored to prevent rust?

Wipe all pieces clean, apply a light coat of oil, and return them to the included suitcase which measures 14.2 by 11.2 by 2.8 inches.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.