We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Telescoping aluminium attic ladder, 11 steps, white door panel, pull rod and ring visible

VEVOR

VEVOR Attic Ladder Telescoping 350 lb 39.37" x 23.6" 11 Steps Aluminium

SKU CH-W9MQ-S7N5Z

Telescoping aluminium attic ladder with 11 steps, 350 lb capacity and insulated concealed door for 9.8 to 10.5 ft ceilings

  • TypeOther Appliances
  • Width24.8
  • 350 lb load capacity from corrosion-resistant aluminium alloy
  • 11 steps sized 13" x 3.2" for stable climbing
  • Fits 9.8 to 10.5 ft ceilings with adjustable legs
  • Pre-drilled holes and screw kit enable three-step installation
  • Insulated door panel closes automatically for thermal efficiency

Aluminium Attic Ladder with 11 Steps

This telescoping attic ladder supports a maximum load of 350 lbs and is constructed from corrosion-resistant aluminium alloy. It provides convenient access for homeowners needing to reach attic spaces with ceiling heights between 9.8 and 10.5 ft. The unit includes a concealed door panel that automatically closes for privacy and thermal insulation.

350 lb Capacity and 11-Step Configuration

The ladder features 11 steps each measuring 13 x 3.2 inches, offering secure footing for users up to the rated 350 lb limit. Its lightweight aluminium frame weighs 39.7 lbs including accessories, allowing manageable handling during installation. The structure is designed to resist deformation and bending under long-term use within the stated capacity.

Fits Standard Rough Openings with Adjustable Legs

Installation requires a rough opening of 23.6 x 39.4 inches and uses pre-drilled holes with a supplied screw kit for direct mounting. Two height-adjustable legs accommodate the 9.8 to 10.5 ft ceiling range, while a 5 ft stainless steel lever and pull ring enable tool-free opening and closing. No shims are needed for operation.

Highlights

  • 350 lb load capacity from corrosion-resistant aluminium alloy
  • 11 steps sized 13" x 3.2" for stable climbing
  • Fits 9.8 to 10.5 ft ceilings with adjustable legs
  • Pre-drilled holes and screw kit enable three-step installation
  • Insulated door panel closes automatically for thermal efficiency

Specifications

TypeOther Appliances
Width24.8

Questions about this item

Will the 350 lb load capacity and 11 aluminium steps support daily use alongside my existing wooden attic hatch frame?

The ladder is built from corrosion-resistant aluminium alloy rated for 350 lb, with 11 steps measuring 13" x 3.2", designed to fit a 23.6" x 39.4" rough opening and 9.8'-10.5' ceiling heights without deforming over time.

How can I verify the telescoping mechanism and concealed door panel operate correctly after installation?

After securing the pre-drilled frame with the included screw kit, extend the ladder fully using the 5 ft stainless steel lever and 1.97" pull ring; the insulated door panel should close automatically and sit flush with the ceiling, confirming smooth operation.

What components arrive in the box and what extra items must I source before fitting the ladder?

The package contains the attic ladder, one lever, one pull ring, a screw kit, two height-adjustable legs and a user manual; you will need to provide basic tools such as a drill, screwdriver and measuring tape for the cut-out and mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.