We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact airbrush compressor with three gravity-feed guns in silver finish

VEVOR

VEVOR Airbrush Kit with Compressor 0.2 0.3 0.8 mm

SKU CH-MDR7-F33MX

Dual-action gravity-feed airbrush set includes 0.2 mm, 0.3 mm and 0.8 mm needles with 120 W compressor delivering 18–23 L/min at 43–57 PSI auto-pressure control

  • TypeOther Appliances
  • Three needle sizes cover fine detail to broad coverage
  • Upgraded nozzle resists bending for consistent atomisation
  • Auto-stop at 57 PSI protects the motor
  • 8 m hose gives flexible reach around the workspace
  • Compact 37 × 17 × 32 cm footprint saves bench space

Airbrush kit with three needle sizes

This kit includes three gravity-feed airbrushes with 0.2 mm, 0.3 mm and 0.8 mm fluid tips for detail, general and broader coverage work. A dual-action trigger on each airbrush controls both airflow and paint volume. The set is aimed at hobbyists and professionals working on models, nails, cakes, textiles or similar small-surface projects.

Compressor with auto pressure control

The 120 W compressor runs on 110 V 60 Hz power and delivers 18 to 23 L/min flow. It starts automatically at 43 PSI and stops at 57 PSI, keeping pressure steady without constant running. The unit measures 14.56 x 6.69 x 12.59 in and weighs 8.81 lbs. A built-in holder stores the airbrush when not in use.

1.8 m hose and included accessories

A 70.8 in (1.8 m) hose with 1/8 in BSP fitting connects the airbrush to the compressor. The package adds a 2-in-1 spray-gun holder, colour mixing wheel, two cleaning brush sets and a user manual. Everything needed to begin spraying is in the box, so no extra fittings or tools are required.

Highlights

  • Three needle sizes cover fine detail to broad coverage
  • Upgraded nozzle resists bending for consistent atomisation
  • Auto-stop at 57 PSI protects the motor
  • 8 m hose gives flexible reach around the workspace
  • Compact 37 × 17 × 32 cm footprint saves bench space

Specifications

TypeOther Appliances

Questions about this item

How do I connect the 1.8 m air hose to the compressor and which 1/8" BSP thread do I tighten first?

Screw the hose onto the compressor outlet using the 1/8" BSP fitting, then attach the other end to the airbrush; the pen holder clips onto the compressor for hands-free pauses.

Which wearable parts will need replacing after extended use with the 0.2 mm, 0.3 mm and 0.8 mm airbrushes?

The fluid nozzles and needles in each airbrush are the primary wear items; cleaning brushes and the colour mixing wheel may also need renewal over time.

At what pressure does the compressor cycle on and off during a long spraying session?

The unit auto-starts at 43 PSI ±10% and auto-stops at 57 PSI ±10%, so pressure oscillates between those limits under sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.