We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black carbon steel barn door hardware kit with two four-foot I-shaped tracks, four hangers, stoppers and floor guides

VEVOR

VEVOR 8FT Sliding Barn Door Hardware Kit Double Door 330LBS I Shape 4.72in

SKU CH-4FVQ-JRW02

Heavy-duty carbon-steel track kit with I-shaped hangers smoothly slides double doors up to 330 lbs and 4.3 ft wide

  • TypeOther Appliances
  • Width4.72
  • Holds double doors up to 330 LBS with solid carbon steel construction
  • Two 4FT track sections simplify assembly and reduce clearance above the doorway
  • Smooth, quiet pulleys slide panels between 1.3" and 1.8" thick without shaking
  • Powder-coated finish resists corrosion for long-lasting appearance and durability
  • Includes hangers, anti-jumpers, stoppers, floor guides and installation tool in one kit

Double-door barn hardware kit

This 8-foot I-shaped track kit is built for two door panels that together measure 3.7 to 4.3 feet wide and 1.3 to 1.8 inches thick. Carbon-steel construction with a black powder-coated finish supports a maximum load of 330 lbs, making it suitable for heavy solid-wood or metal doors in residential or light-commercial openings.

Two-piece track with included tools

The track arrives in two 4-foot sections that join at the centre, reducing the length that must be manoeuvred through doorways and simplifying alignment. An installation tool and a full screw set are supplied, so only a drill and level are typically needed. The most common issue is uneven wall blocking; if the mounting surface is not flat, the track can bind and the anti-jump discs will not engage cleanly.

330 lb weight rating per pair

The single specification that decides fit is the 330 lbs maximum loading bearing for the double-door assembly. Weigh each panel before purchase; if the combined weight exceeds this figure the hangers and track can deflect, causing premature wear or door sag.

Highlights

  • Holds double doors up to 330 LBS with solid carbon steel construction
  • Two 4FT track sections simplify assembly and reduce clearance above the doorway
  • Smooth, quiet pulleys slide panels between 1.3" and 1.8" thick without shaking
  • Powder-coated finish resists corrosion for long-lasting appearance and durability
  • Includes hangers, anti-jumpers, stoppers, floor guides and installation tool in one kit

Specifications

TypeOther Appliances
Width4.72

Questions about this item

How can I confirm the 8 ft track is level and the double doors glide silently after installation?

Use the included installation tool to secure the two 4 ft carbon-steel track sections, mount the four I-shaped hangers on doors 1.3 to 1.8 in thick, then slide each panel — movement should be smooth with no binding or noise.

Which components come in the box and what must I supply myself?

The kit provides two 4 ft tracks, four I-shaped hangers, seven plastic washers, four anti-jumpers, four door stoppers, two floor stoppers, seven guide-rail gaskets, eleven plastic rods, an installation tool, screws and a manual; you supply the two door panels totalling 3.7 to 4.3 ft wide.

My two door panels measure 4 ft combined and 1.5 in thick — does this kit fit?

Yes. The hardware supports a total double-door width of 3.7 to 4.3 ft and a door thickness of 1.3 to 1.8 in, so your 4 ft by 1.5 in panels are within range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.