We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact single-horn cast steel anvil, dark finish, flat face and rounded horn on sturdy base

VEVOR

VEVOR 8.82 lb Single-Horn Cast Steel Anvil 50HRC

SKU CH-XJ7B-KFGNS

A compact 8.82 lb cast-steel anvil with a 50 HRC surface and 70 % rebound for precise metal shaping

  • TypeOther Appliances
  • Width5.51
  • Forged from cast steel for lasting durability
  • Heat-treated to 50HRC for impact resistance and corrosion protection
  • Over 70% rebound rate speeds up forging work
  • Smooth round horn enables precise bending and shaping
  • Compact 132 x 68 mm face fits intricate metalwork

Compact cast-steel anvil for precision metalwork

This single-horn anvil weighs 8.82 lbs and measures 218 x 98 x 106 mm, making it suited to bench-top forging and detailed shaping tasks. The 5.20 x 2.68 inch work face provides a focused area for bending, riveting and light forming. It is aimed at hobbyists, jewellers and small-shop smiths who need a stable, portable anvil without a full-size footprint.

50HRC surface with 70% rebound for consistent

Heat-treated to 50HRC at 800°C, the cast steel face resists deformation and returns over 70% of hammer energy, reducing fatigue during repeated blows. The 132 x 68 mm tabletop handles light to medium stock comfortably, while the smooth round horn allows clean curves without marking the workpiece. Very heavy bar stock or high-volume production will exceed the practical mass and face area of this tool.

Unpainted finish avoids contamination.

The bare steel surface prevents paint transfer onto hot or polished metal, and the 8.8 kg mass anchors the anvil during normal hand-hammer work. No forced-air cooling or powered components are present, so operation is silent and draws no electricity. The compact 5.51 inch width keeps the centre of gravity low, limiting unwanted movement on a sturdy bench.

Highlights

  • Forged from cast steel for lasting durability
  • Heat-treated to 50HRC for impact resistance and corrosion protection
  • Over 70% rebound rate speeds up forging work
  • Smooth round horn enables precise bending and shaping
  • Compact 132 x 68 mm face fits intricate metalwork

Specifications

TypeOther Appliances
Width5.51

Questions about this item

Will the 132 x 68 mm face on this 8.82 lb cast steel anvil sit flat on my existing bench block?

The working face measures 132 x 68 mm and the base footprint is 218 x 98 mm, so the anvil will overhang any smaller block; use a solid surface at least as large as the base for full support.

How can I verify the 50HRC hardness and 70% rebound are performing after I mount it?

Strike the face with a ball-peen hammer; the steel should ring clearly and the hammer should bounce back sharply with little denting, confirming the heat-treated 50HRC surface and high rebound.

Does the box include mounting bolts or a stand for the 218 x 98 mm base?

The package contains only the anvil and a user manual; mounting hardware, a stand or a dedicated bench plate must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.