We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 6L ultrasonic cleaner with digital control panel and basket

VEVOR

VEVOR 6L Ultrasonic Cleaner 40kHz Heated Digital Timer

SKU CH-807Z-9V72F

6-litre stainless-steel ultrasonic cleaner with 40 kHz frequency, 180 W ultrasonic power, 300 W heating to 80 °C and digital timer up to 30 minutes

  • TypeOther Appliances
  • Width9.06
  • 40 kHz frequency with 180 W ultrasonic power removes stubborn grime
  • Heated tank adjustable up to 80 °C boosts cleaning efficiency
  • Digital timer programmable from 0 to 30 minutes for precise cycles
  • 6 L SUS304 stainless steel tank fits items up to 230 x 95 x 110 mm
  • Three sandwich-type transducers deliver uniform cavitation across the tank

Ultrasonic Cleaner 6L Capacity

The VEVOR 6L ultrasonic cleaner operates at 40kHz with 180W ultrasonic power and a 300W heater. It targets professionals and hobbyists who need reliable cleaning for jewellery, eyeglasses, watches, small parts and circuit boards. The SUS304 stainless steel tank and basket resist corrosion while holding up to 6L of solution. Digital controls allow precise time and temperature adjustment for repeatable results.

Upgrade From Manual Or Smaller Baths

This unit replaces hand scrubbing, basic non-heated tanks and lower-capacity cleaners that cannot fit larger workpieces. The jump is worth it when you regularly clean items up to 230 x 95 x 110 mm and need heated cycles to dissolve grease or flux residues efficiently. Three sandwich-type piezoelectric transducers distribute cavitation more evenly than single-transducer designs, reducing blind spots in the bath.

Sustained Operation With Heated Cycles

The heater raises solution temperature up to 80°C while the timer runs cycles up to 30 minutes, maintaining consistent cavitation during extended cleaning sessions. The 100-120V 60Hz supply delivers stable power to both ultrasonic and heating elements without thermal throttling. The 4.6 kg stainless steel construction dissipates heat effectively, allowing back-to-back cycles for batch processing without performance drop-off.

Highlights

  • 40 kHz frequency with 180 W ultrasonic power removes stubborn grime
  • Heated tank adjustable up to 80 °C boosts cleaning efficiency
  • Digital timer programmable from 0 to 30 minutes for precise cycles
  • 6 L SUS304 stainless steel tank fits items up to 230 x 95 x 110 mm
  • Three sandwich-type transducers deliver uniform cavitation across the tank

Specifications

TypeOther Appliances
Width9.06

Questions about this item

What bench space does the 12.80 x 6.89 x 11.61 in unit need?

Allow at least 12.80 x 6.89 in of flat surface plus a few inches clearance for the lid and power cord.

Which step do users skip when setting the 0-30 min timer and 0-80 °C heater?

Fill the SUS304 tank with solution first, then set temperature, wait for heat, add items, finally start the timer.

When should the 300 W heater element or 40 kHz transducers be checked?

Inspect transducers for cavitation loss annually; descale the heater element whenever mineral build-up appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.