We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A stack of 26 flat aluminum mesh panels each 48 inches long and 6 inches wide with small round holes and a thin profile

VEVOR

VEVOR 6in-104 Aluminum Gutter Guard 26 PCS 104 ft

SKU CH-S00P-JQFBC

Aluminium gutter guard kit with 26 pieces covering 104 ft, 0.157 in mesh blocks leaves and debris while allowing water flow

  • TypeOther Appliances
  • Width4.53
  • Prevents leaf and debris build-up with 0.157" mesh openings
  • Covers 104 ft using 26 pre-cut 48" sections
  • Rust-resistant 0.02" thick aluminum withstands all weather
  • DIY trimmable to suit any 6" gutter shape
  • Includes 26 plates plus hex tapping screws and bushing

Aluminium Gutter Guard 104 ft Kit

This kit supplies 26 aluminium gutter-guard sections totalling 104 ft of coverage. Each piece measures 48 in long by 6 in wide and is cut from 0.02 in thick aluminium alloy with a 0.157 in hole diameter. The perforated mesh blocks leaves, pine needles and roofing grit while letting water pass through. Hexagonal tapping screws and a bushing are included for DIY installation.

Suits Homeowners Clearing Standard 6 in Gutters

The guards fit standard 6 in wide rain gutters and can be trimmed on site for corners, valleys or non-standard lengths. They are intended for residential roof lines where debris clogging is a recurring problem. Builders needing a different gutter width, a finer mesh for very small particles, or a non-metal material should look at other options.

Check Gutter Width and Fastener Access Before

Verify that your existing gutters measure 6 in across the top opening so the 6 in wide panels sit correctly. Confirm you can reach the gutter lip safely to drive the supplied M4.8 × 13 mm screws through the pre-drilled holes. Ensure the roof pitch and gutter hanger spacing allow the 48 in panels to lie flat without bridging gaps.

Highlights

  • Prevents leaf and debris build-up with 0.157" mesh openings
  • Covers 104 ft using 26 pre-cut 48" sections
  • Rust-resistant 0.02" thick aluminum withstands all weather
  • DIY trimmable to suit any 6" gutter shape
  • Includes 26 plates plus hex tapping screws and bushing

Specifications

TypeOther Appliances
Width4.53

Questions about this item

What gutter width and shape must I already have for the 48'' × 6'' panels to fit?

The guards fit standard 6-inch wide rain gutters and can be cut to match various gutter shapes and lengths.

Will the 0.157'' mesh holes block fine debris such as pine needles and roofing grit that pass through older screens?

The 0.157'' hole diameter is designed to stop leaves, pine needles and roofing grit while allowing water to flow through.

How can I confirm the 104 ft system is installed correctly and draining properly?

After securing the 26 panels with the supplied M 4.8 × 13 tapping screws and plates, run water through the gutters and verify it flows freely without overflow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.