We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VEVOR

VEVOR 6003-128mm-black insulation 52 sq ft 50 mil 47 pcs

SKU CH-GNZ5-8BF8M MPN 6003-128mm-black

Butyl-based sheets cover 52 sq ft at 50 mil thickness to damp vibration and reduce cabin noise

  • Width10.83
  • Covers 52 sq ft with 47 self-adhesive panels
  • 50 mil butyl layer blocks road noise and vibration
  • 3 mm thickness adds mass without reducing cabin space
  • Each sheet 9.8 x 15.7 in for easy contour fitting
  • 29 kg total weight damps low-frequency resonance

What this kit covers

The VEVOR 6003-128mm-black kit supplies 52 square feet of 50 mil butyl-based sound deadening material across 47 individual sheets. Each sheet measures 9.8 by 15.7 inches and the total package weighs 22.685 pounds. It is intended for automotive interior panels where vibration damping and noise reduction are required.

Thickness determines damping mass

At 50 mil (1.3 mm) the butyl layer provides the mass needed to lower panel resonance in doors, floors and roof sections. The silver aluminium facing adds a thermal barrier while keeping the sheets flexible enough for curved surfaces. Coverage of 52 sq ft is the figure that decides whether one kit finishes the job or a second is necessary.

Suited for full-vehicle treatment.

Builders planning to treat every major panel in a car, van or truck will find the sheet count and total area convenient. Installers who only need a few small pieces for a single door or boot lid should look at smaller packs because the 47-piece quantity and 22.685-pound weight make this kit excessive for limited applications.

Highlights

  • Covers 52 sq ft with 47 self-adhesive panels
  • 50 mil butyl layer blocks road noise and vibration
  • 3 mm thickness adds mass without reducing cabin space
  • Each sheet 9.8 x 15.7 in for easy contour fitting
  • 29 kg total weight damps low-frequency resonance

Specifications

Width10.83

Questions about this item

How much floor area does the 52 sq ft rating actually cover once the 47 pieces are laid in a vehicle?

The 47 pieces each measure 9.8 by 15.7 inches, giving a combined coverage of 52 square feet when installed with minimal gaps.

What does the 50 mil thickness mean for the butyl layer when it is pressed against metal panels?

At 50 mil (1.3 mm) the butyl-based mat conforms to curves and resists vibration without adding bulk that would interfere with trim reinstallation.

Will the 10.83 inch roll width fit through standard door openings for installation?

Each sheet is 9.8 inches wide, so it passes through typical door apertures and can be handled inside the cabin without folding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.