We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver carbon steel sliding barn door hardware kit with two track rails and roller assemblies

VEVOR

VEVOR 6 ft Sliding Barn Door Hardware Kit 330 lbs Silver

SKU CH-PHXD-6A364

Carbon-steel sliding track kit holds doors up to 36 in wide and 330 lbs, includes all mounting hardware for wood, glass or MDF panels

  • TypeOther Appliances
  • Width4.72
  • Supports doors up to 330 lbs with carbon steel track
  • Smooth quiet glide from high-density thermoplastic wheels and bearings
  • Fits doors 1-3/8 to 1-3/4 inches thick up to 36 inches wide
  • Complete kit includes rails rollers hardware and step-by-step manual
  • Space-saving sliding system for wood glass or MDF doors

6 ft Sliding Barn Door Kit

This 6 ft sliding barn door hardware kit supports a single door up to 36 inches wide and 1-3/8 to 1-3/4 inches thick. It is built for homeowners or renovators who want a space-saving divider for bedrooms, living rooms, bathrooms or outdoor areas. The track holds up to 330 lbs, making it suitable for solid wood, glass or MDF doors. The door itself is not included.

330 lbs Capacity and Door Limits

The carbon steel track handles doors weighing up to 330 lbs (150 kg) without sagging. It accommodates widths up to 36 inches (914.4 mm) and thicknesses between 34.92 mm and 44.45 mm. Heavier or wider doors exceed the rated capacity and are not supported. The kit is designed for a single sliding panel only, so double-door or bi-parting setups cannot use this hardware.

Included Rollers, Stoppers and Floor Guide

Two POM roller assemblies with high-density thermoplastic wheels provide smooth, quiet travel along the 72.05-inch track. Two stoppers prevent over-travel, while anti-jump disks keep the door seated on the rail. A floor guide with anchors stabilises the bottom edge. All mounting hardware — self-tapping screws, plastic anchors, cap nuts, washers, sleeves and a 2.5 mm hex wrench — is supplied for wood or masonry walls.

Highlights

  • Supports doors up to 330 lbs with carbon steel track
  • Smooth quiet glide from high-density thermoplastic wheels and bearings
  • Fits doors 1-3/8 to 1-3/4 inches thick up to 36 inches wide
  • Complete kit includes rails rollers hardware and step-by-step manual
  • Space-saving sliding system for wood glass or MDF doors

Specifications

TypeOther Appliances
Width4.72

Questions about this item

Will the 72.05 in track clear the trim on a 36 in wide door?

The kit fits doors up to 36 in wide; the 72.05 in track provides the required double-width clearance for a single sliding panel.

How do I confirm the rollers are running on the POM anti-jump disks correctly?

After hanging the door, slide it fully open and shut — it should move silently with no vertical bounce; the two anti-jump disks lock the rollers to the track.

Which fasteners in the box go into wood studs versus drywall?

Use the 5 M8x90 mm self-tapping screws with the 12x50 mm plastic anchors for stud mounting; the 6x30 mm white anchors and M4x25 mm screws are for hollow-wall sections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.