We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular grey ABS enclosure with front display and terminals, 183 by 125 by 70 mm

VEVOR

VEVOR 50A MPPT Solar Charge Controller 12V/24V Bluetooth

SKU CH-6T3V-XN9FQ

A 50 A MPPT charge controller auto-detects 12 V or 24 V systems, handles up to 100 V panel input and 98 % conversion efficiency, then lets you monitor and adjust charging via built-in Bluetooth

  • TypeOther Appliances
  • MPPT tech delivers up to 98% conversion efficiency for faster battery charging
  • Handles up to 50A charge current with 12V 660W or 24V 1320W panel input
  • Works with sealed AGM, gel, flooded and lithium deep-cycle batteries
  • Built-in Bluetooth enables remote monitoring and control via mobile app
  • Operates reliably from -20°C to 50°C in a compact 183 x 125 x 70 mm case

50A MPPT Controller for Home and Mobile Solar

This 50-amp MPPT charge controller manages 12-volt or 24-volt battery banks in stationary and mobile photovoltaic systems. It accepts up to 100 volts DC open-circuit from the array and automatically detects the battery voltage. The unit suits installers who want a single controller for both voltage platforms.

660W at 12V and 1320W at 24V with 98% Efficiency

The controller delivers a maximum charging current of 50 amps, supporting up to 660 watts of panel power on a 12-volt bank and 1320 watts on a 24-volt bank. MPPT tracking reaches 98 percent conversion efficiency, outperforming PWM by 15 to 30 percent. Systems larger than these wattage limits will require an additional controller.

ABS+PC Housing with Bluetooth Monitoring

The enclosure measures 183 by 125 by 70 millimetres and weighs 1.33 kilograms, built from ABS and PC for durability across an operating range of minus 20 to 50 degrees Celsius. A built-in Bluetooth module connects to a neutral app for remote monitoring and adjustment, while an external temperature sensor port enables compensated charging for sealed, gel, flooded and lithium batteries.

Highlights

  • MPPT tech delivers up to 98% conversion efficiency for faster battery charging
  • Handles up to 50A charge current with 12V 660W or 24V 1320W panel input
  • Works with sealed AGM, gel, flooded and lithium deep-cycle batteries
  • Built-in Bluetooth enables remote monitoring and control via mobile app
  • Operates reliably from -20°C to 50°C in a compact 183 x 125 x 70 mm case

Specifications

TypeOther Appliances

Questions about this item

Will this 50A MPPT controller work with my existing 12V AGM battery bank?

Yes, it auto-detects 12V or 24V systems and supports sealed AGM, gel, flooded and lithium chemistries with fast, balance and float charging modes.

How can I verify the controller is tracking the maximum power point correctly after installation?

Pair the built-in Bluetooth module with the companion app to view real-time voltage, current and the 98% MPPT efficiency figure while the array is producing power.

Does the package include the external temperature sensor or must I buy it separately?

The box contains the controller, a packaging bag and a user manual; the external temperature sensor is supported but not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.