VEVOR
VEVOR 500W 12V 3-Blade Wind Turbine Kit with Anemometer and MPPT Controller
A 500W 12V wind turbine kit with three blades, anemometer and MPPT controller starts at 2.5 m/s and runs up to 25 m/s
- TypeOther Appliances
- Width14.96
- 500 W rated output powers homes and off-grid sites
- 5 m/s start-up speed captures energy in light winds
- 3-blade 1.2 m rotor spans 47 in for strong torque
- MPPT controller optimises voltage and current automatically
- 55 dB operation keeps noise low for residential use
Wind turbine kit for off-grid power
This 500W 12V wind turbine kit includes a three-blade generator, anemometer and MPPT controller for battery-charging applications on homes, farms, RVs and boats. The permanent-magnet synchronous generator starts at 2.5 m/s and reaches rated output at 12 m/s. Tower pole is not included.
500W rated power at 12 m/s wind
The single figure that decides fit is the 500W rated output at 12 m/s wind speed with a 2.5 m/s start-up threshold. If your site averages below 3 Beaufort scale the turbine will rarely reach rated power. Match the controller to a 12V battery bank and size wiring for the full 500W.
55dB noise from 1.2 m rotor
Normal operation produces 55dB at the 1.2 m wheel diameter while the MPPT controller regulates voltage and current for the 12V system. The three-blade design runs at 12 m/s rated wind speed within a 3–25 m/s operating range. Net weight is 6.5 kg for structural mounting planning.
Highlights
- 500 W rated output powers homes and off-grid sites
- 5 m/s start-up speed captures energy in light winds
- 3-blade 1.2 m rotor spans 47 in for strong torque
- MPPT controller optimises voltage and current automatically
- 55 dB operation keeps noise low for residential use
Specifications
| Type | Other Appliances |
|---|---|
| Width | 14.96 |
Questions about this item
What does the 500W rating actually mean once the turbine is installed?
The 500W rating is reached at a steady 12 m/s wind speed; at lower speeds output drops, and the unit starts generating from 2.5 m/s.
What does the included MPPT controller handle in practice?
The controller adjusts current and voltage from the three-phase AC generator to suit a 12V battery bank and protects against over-charge.
What mounting hardware is required beyond the supplied sleeve and screws?
A tower pole is not included; you must provide a pole that fits the supplied sleeve and can support the 6.5 kg unit at 1.2 m rotor diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



