We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey cylindrical 5 gallon sandblasting tank on wheels with nozzle gun and oil-water separator

VEVOR

VEVOR 5 Gallon Sand Blaster 60-110 PSI FF-Q901

SKU CH-YNAD-BD6TS

A 5-gallon portable abrasive blasting tank operating at 60-110 PSI with oil-water separator and four ceramic nozzles for rust and paint removal

  • TypeOther Appliances
  • Width17.32
  • 5-gallon tank handles large-area jobs efficiently
  • 60-110 PSI operating pressure strips rust and paint fast
  • Die-cast aluminium gun is lighter and easier to control
  • Oil-water separator keeps media dry to prevent clogging
  • Four ceramic nozzles included for versatile abrasive sizes

5 Gallon Sand Blaster for Surface Work

This 5 gallon abrasive blasting tank handles large-area rust, paint and stain removal on iron frames, statues, car paint and marble. Operating pressure runs from 60 to 110 PSI with air consumption between 6 and 25 CFM. The unit ships new with four ceramic nozzles, a face mask, seal tape and a manual.

Check Compressor and Abrasive Compatibility

You must supply a separate 5.5 kW air compressor able to deliver the required CFM range. Verify that your abrasive media falls within the 60 to 100 grit specification and that the suggested fill of 2.8 gallons suits the job. The built-in oil-water separator with pressure gauge removes moisture to prevent clogging.

Portable Tank with Wheels and Upgraded Gun

The tank measures 13.4 by 13.6 by 30.3 inches and weighs 24.7 lbs, rolling on 5.9 inch diameter wheels for shop mobility. A die-cast aluminium alloy gun replaces older brass valves for lighter handling and quicker media control. The separator frees the system from wet-media blockages during extended blasting sessions.

Highlights

  • 5-gallon tank handles large-area jobs efficiently
  • 60-110 PSI operating pressure strips rust and paint fast
  • Die-cast aluminium gun is lighter and easier to control
  • Oil-water separator keeps media dry to prevent clogging
  • Four ceramic nozzles included for versatile abrasive sizes

Specifications

TypeOther Appliances
Width17.32

Questions about this item

What comes in the box and do I need to buy anything else to start blasting?

The package includes the 5-gallon tank, four ceramic nozzles (3/32", 7/64", 1/8", 9/64"), a face mask, seal tape and manual. You must supply a 5.5 kW air compressor and 60-100 grit abrasive media separately.

Which nozzle size should I choose for general rust and paint removal?

The 9/64" nozzle is pre-installed and works well for most 60-100 grit jobs; swap to the smaller 3/32" or 7/64" tips for finer detail or tighter patterns.

What does the 60-110 PSI operating range mean when I hook this up to my compressor?

The tank runs at 60-110 PSI and draws 6-25 CFM; your 5.5 kW compressor must maintain pressure in that band so the oil-water separator can keep the abrasive dry and flowing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.