VEVOR
VEVOR 4SSM5/12 Deep Well Submersible Pump 2HP 230V 37GPM 427ft 33ft Cord 4in Stainless Steel
A 2HP 230V stainless-steel submersible pump delivers 37 GPM flow and 427 ft head with 12 impeller stages and a 33 ft cord
- TypeOther Appliances
- Width4.33
- Delivers 37 GPM flow and 427 ft head for deep-well supply
- 12-stage thermoplastic impellers maintain steady pressure at 3450 rpm
- Full stainless-steel construction resists corrosion during long submersion
- IP68 waterproof grade and ETL certification confirm safe underwater operation
- 33 ft power cord with US plug simplifies installation in 4 in casings
Product identity
The VEVOR 4SSM5/12 is a 2 HP, 230 V deep-well submersible pump built for 4-inch or larger casings. It delivers up to 37 GPM at 427 ft head using twelve thermoplastic impeller stages and includes a 33 ft power cord with US plug.
Installation notes
The unit weighs enough to require two people or a hoist for lowering into the well; the 1-1/4 inch NPT discharge threads directly into standard drop pipe. Ensure the cord slack is secured so the plug stays above water and the pump does not hang from the cable.
Pre-purchase checks
Verify your well casing is at least 4 inches inner diameter and that the static water level plus drawdown does not exceed the 427 ft head rating. Confirm a 230 V, 60 Hz, 1500 W circuit with proper grounding is available at the wellhead.
Highlights
- Delivers 37 GPM flow and 427 ft head for deep-well supply
- 12-stage thermoplastic impellers maintain steady pressure at 3450 rpm
- Full stainless-steel construction resists corrosion during long submersion
- IP68 waterproof grade and ETL certification confirm safe underwater operation
- 33 ft power cord with US plug simplifies installation in 4 in casings
Specifications
| Type | Other Appliances |
|---|---|
| Width | 4.33 |
Questions about this item
How can I verify the pump is delivering the rated 37GPM flow and 427 ft head after installation?
Measure the discharge pressure and flow rate at the outlet; they should match the 37GPM maximum flow and 427 ft maximum head specifications under normal operating conditions.
What components are included and what must I purchase separately for a complete installation?
The box contains the submersible pump and a 33 ft electric cord with US plug; you will need to supply discharge piping, a check valve, electrical wiring to the control box, and any well seal or torque arrestor required by your well casing.
Which discharge size and voltage version should I select for a 4-inch well casing running on 230V power?
Choose the 1-1/4" NPT discharge model rated for 230V/60Hz; it fits 4-inch or larger casings and matches the 2HP motor specifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013042BTC
In stock