VEVOR
VEVOR 4SSM5/12 2HP 230V 37GPM 427 ft 4" Stainless Steel Deep Well Pump
A 2 HP, 230 V stainless-steel submersible pump delivers up to 37 GPM and 427 ft of head with 12 thermoplastic impellers, IP68 waterproofing.
- TypeOther Appliances
- Width8.07
- 2HP motor delivers 37 GPM maximum flow for high-volume water supply
- 12-stage thermoplastic impellers achieve 427 ft maximum head for deep-well performance
- Full stainless-steel construction with IP68 waterproof rating resists corrosion during long-term submersion
- External control box with 33 ft cord simplifies installation and operation
- ETL certified, insulation class F, operating temperature 32-104 °F for reliable service
Deep Well Pump for 4-Inch Casings
The VEVOR 4SSM5/12 is a 2HP submersible pump built for 4-inch or larger well casings. It runs on 230V single-phase power and includes an external control box with a 33 ft cord. Stainless-steel construction and IP68 sealing protect the motor and discharge components during long-term immersion. ETL certification confirms compliance with North American safety standards.
Suits Deep Residential or Light Irrigation Wells
This unit suits owners who need up to 37 GPM from depths reaching 427 ft. The 12-stage thermoplastic impellers deliver that head at 3450 rpm while resisting sand ingress. Buyers whose well diameter is smaller than 4 inches cannot install this pump. Users without a 230V supply or who require flows above 37 GPM should look at alternative models.
427 ft Maximum Head at 37 GPM
The single figure that decides fit is the 427 ft maximum head combined with 37 GPM maximum flow. If the static water level plus friction losses exceed 427 ft, this pump will not deliver water. If the required flow is higher than 37 GPM, a larger unit is necessary. Match the well depth and demand to these limits before purchasing.
Highlights
- 2HP motor delivers 37 GPM maximum flow for high-volume water supply
- 12-stage thermoplastic impellers achieve 427 ft maximum head for deep-well performance
- Full stainless-steel construction with IP68 waterproof rating resists corrosion during long-term submersion
- External control box with 33 ft cord simplifies installation and operation
- ETL certified, insulation class F, operating temperature 32-104 °F for reliable service
Specifications
| Type | Other Appliances |
|---|---|
| Width | 8.07 |
Questions about this item
What well casing diameter does the 4-inch pump body require?
The pump body is 4 inches (10.2 cm) in diameter, so it fits a 4-inch or larger well casing.
How is the external control box connected to the 230 V supply?
The control box ships with a US plug; plug it into a 230 V / 60 Hz circuit and run the 33 ft cord down to the pump.
When should the 12 thermoplastic impeller stages be inspected for wear?
The manufacturer states the stainless-steel pump can operate 8 to 10 years; plan to pull and inspect the impellers around that interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



