We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal hay spear frame with one long 49 inch central tine and two shorter 17.5 inch stabiliser spikes on a quick attach plate

VEVOR

VEVOR 49" Hay Spear 1600 lbs 2 Stabilizer Spears 17.5

SKU CH-MT1G-VXEM6

A 49‑inch hay spear rated for 1600 lbs with two 17.5‑inch stabiliser spears for skid‑steer and tractor quick‑attach mounting

  • TypeOther Appliances
  • Width24.41
  • Handles heavy bales with 1600 lbs capacity
  • Spring steel shaft resists bending and corrosion
  • Fits most skid steer quick-attach systems
  • Two 17.5" stabilizer spears prevent load tipping
  • Simple assembly with self-locking nuts and hex screws

49″ Hay Spear with Twin Stabilisers

The VEVOR hay spear is a front-mounted attachment for skid-steer loaders and tractors fitted with a quick-attach plate. A single 49″ main tine and two 17.5″ stabiliser spikes handle round or square bales up to 1600 lbs. The assembly weighs 126.76 lbs and mounts directly to the loader frame without additional brackets.

Spring-Steel Construction and Powder Coating

The 45 mm diameter main shaft is forged from high-strength spring steel and finished with a corrosion-resistant powder coat. The 1.18″ thread diameter and 2.05″ thread length lock the tine securely to the frame, resisting bending or breakage when penetrating dense stacks. No hydraulic or electrical connections are required, so there are no thermal, noise or power-draw considerations during operation.

Quick-Attach Fit and Clear Frame Profile

The universal quick-attach interface fits most common skid-steer and tractor mounting plates, and the 1160 × 570 × 145 mm frame leaves the loader’s lift arms and hydraulic couplers unobstructed. Self-locking nuts and external hex screws are included for one-person assembly. The narrow 5.7″ frame width preserves forward visibility and does not interfere with bucket or fork changeovers.

Highlights

  • Handles heavy bales with 1600 lbs capacity
  • Spring steel shaft resists bending and corrosion
  • Fits most skid steer quick-attach systems
  • Two 17.5" stabilizer spears prevent load tipping
  • Simple assembly with self-locking nuts and hex screws

Specifications

TypeOther Appliances
Width24.41

Questions about this item

How do I attach the 49.2 in spear and 17.5 in stabilizers to my skid steer's quick attach plate?

Align the frame's 45.7 x 22.4 in mount with the quick attach, insert the pins fully, then lock the levers. The step often missed is tightening the external hex screws and self-locking nuts on each stabilizer spear before lifting.

Which parts of the 1600 lbs hay spear need periodic inspection or replacement?

Check the 1.77 in main spear tip and 1.26 in stabilizer tips for wear or bending. Inspect the powder coating for chips that expose the spring steel to corrosion. Replace self-locking nuts if they no longer hold torque.

At what load does the 2.36 in diameter shaft show permanent deflection during repeated lifts?

The 1600 lbs rating is the maximum capacity. Operating near this limit with the 49.2 in lever arm increases bending stress on the 1.77 in shaft. Avoid sudden jerks to prevent permanent deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.