VEVOR
VEVOR 4605S2.500-10 20 Inch Drawer Slides 10 Pairs 100 Lbs Soft Close
Ten pairs of 20 inch carbon-steel drawer slides with soft-close ball bearings and 100 lb load capacity
- TypeOther Appliances
- Width6.1
- Holds up to 100 lbs per pair thanks to carbon steel construction
- Soft-close mechanism shuts drawers quietly without slamming
- Full 20 inch extension gives complete access to drawer contents
- Ten pairs included with self-tapping screws for quick installation
- Slim 12.7 mm profile fits standard cabinet openings
20 Inch Soft-Close Drawer Slides
These 20 inch side-mount drawer slides come in ten pairs for cabinet and kitchen projects. Each pair is rated for 100 lbs of load bearing and uses carbon steel construction with ball-bearing movement.
Installation and common issues
The set includes self-tapping screws ST 3.5 x11 for mounting to the cabinet and drawer sides. Pre-drilling pilot holes prevents the thin rail walls from splitting during screw insertion. Misaligned brackets often cause binding, so verify parallel spacing before final tightening.
Limits of the side-mount standard
Full extension travel requires the drawer box to match the 20 inch slide length exactly; shorter drawers will not open fully. The 1.77 inch rail width reduces internal drawer width by that amount on each side. Soft-close damping adds resistance that can feel stiff on very light drawers under 10 lbs.
Highlights
- Holds up to 100 lbs per pair thanks to carbon steel construction
- Soft-close mechanism shuts drawers quietly without slamming
- Full 20 inch extension gives complete access to drawer contents
- Ten pairs included with self-tapping screws for quick installation
- Slim 12.7 mm profile fits standard cabinet openings
Specifications
| Type | Other Appliances |
|---|---|
| Width | 6.1 |
Questions about this item
How do I verify the 100 lbs soft-close drawer slides are working correctly after installation?
Open and close each drawer fully; the ball-bearing action should feel smooth and the soft-close must engage silently during the last few centimetres of travel without slamming.
What hardware is included with the 10 pairs of 20 inch carbon-steel slides?
The box contains ten drawer slides and one set of self-tapping screws ST 3.5 x 11.
Which version of the 4605S2.500-10 should I choose for a 508 mm drawer depth?
This model is built for a 20 inch / 508 mm drawer length and rated at 100 lbs / 45.4 kg per pair.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



