We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black carbon steel four-tier filament rack on swivel wheels, 750 by 455 by 1230 mm

VEVOR

VEVOR 4-Tier Filament Storage Rack Black Carbon Steel 750x455x1230mm

SKU CH-96CS-8GVX1

A four-tier carbon-steel rack with swivel wheels and adjustable feet stores up to 40 filament spools at 40 lb per shelf

  • TypeOther Appliances
  • Width8.07
  • Holds up to 40 spools with 40 lbs per shelf capacity
  • Moves easily on four swivel casters with two locking brakes
  • Converts to fixed feet for 160 lbs static load stability
  • Carbon steel frame resists wear for long-term workshop use
  • Compact 750 x 455 x 1230 mm footprint fits tight spaces

Four-Tier Filament Rack for 3D Printing Workspaces

The VEVOR rack provides four carbon-steel shelves designed to hold up to 40 spools in a home, studio or workshop. Each shelf supports 40 lbs, giving a combined mobile capacity of 88 lbs on the included swivel casters. The unit ships new with all hardware and tools needed for assembly.

Capacity and Load Limits

Four tiers deliver space for roughly 40 spools while each shelf carries 40 lbs before reaching its limit. On wheels the whole rack handles 88 lbs; switching to the adjustable foot cups raises the static rating to 160 lbs for heavier, non-spool items. The 750 x 455 mm footprint sets the practical width and depth boundaries for spool organisation.

Carbon Steel Build and Mobility Options

The black carbon-steel frame resists wear and keeps spools secure during daily use. Two-inch swivel casters — two with brakes, two without — allow easy repositioning, while the supplied foot cups lock the rack in place for maximum stability. Assembly uses 17 M6×30 mm socket-head screws with the provided hex and open wrenches.

Highlights

  • Holds up to 40 spools with 40 lbs per shelf capacity
  • Moves easily on four swivel casters with two locking brakes
  • Converts to fixed feet for 160 lbs static load stability
  • Carbon steel frame resists wear for long-term workshop use
  • Compact 750 x 455 x 1230 mm footprint fits tight spaces

Specifications

TypeOther Appliances
Width8.07

Questions about this item

Will the 750 mm wide shelves fit alongside my existing 3D printer on the same workbench?

Each shelf is 750 mm wide and 455 mm deep, so measure your bench depth against 455 mm and allow 750 mm of clear width for the rack to sit flush beside the printer.

How can I verify the rack is stable once assembled with the swivel casters?

Lock the two braked casters, press down on the top shelf — rated for 40 lbs — and confirm there is no wobble; the carbon-steel frame should feel rigid at the full 1230 mm height.

Does the package include the M6×30 mm screws and tools needed for assembly, or must I buy them separately?

The box contains the rack, 17 M6×30 mm hex socket screws, four 2-inch swivel casters (two braked), four foot cups, an open wrench, a hex wrench and a user manual — no extra hardware required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.