We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel firewood rack with waterproof cover, four feet wide, elevated base

VEVOR

VEVOR 4 ft Firewood Rack with Cover 1/4 Cord 400 lb

SKU CH-M32F-J6TRY

Stores a quarter cord of firewood off the ground on a powder-coated steel frame with a waterproof 600D Oxford cover

  • TypeOther Appliances
  • Stores up to 1/4 cord of firewood
  • Holds 400 lb with heavy-duty steel frame
  • Powder-coated steel resists rust and corrosion
  • 140 mm elevated base improves air circulation
  • 600D Oxford cover with PU coating blocks rain and snow

4 ft Steel Firewood Rack

This 4 ft steel rack stores up to 1/4 cord of firewood with a 400 lb weight capacity. The powder-coated Q195 frame measures 48.03 × 12.60 × 46.46 in and sits on a reinforced wide base for stability. It suits porches, patios, gardens or backyard setups where dry wood is needed year-round.

Elevated Airflow and Cover

The frame raises logs 140 mm off the ground so air circulates freely and moisture drains away. A 600D Oxford fabric cover with PU coating adds waterproof and UV protection, shielding stacked wood from rain and snow without trapping humidity. The partial cover design keeps the front open for easy access while the top stays protected.

Hardware Kit for Assembly

The box includes two side frames, six base rails, 16 M6×10 mm screws, 16 M6×50 mm screws, 16 M6 nuts, an Allen wrench and a hex wrench. A user manual guides the bolt-together build using the supplied 20 mm square tubes with cut sections. No extra tools or fasteners are required to complete the rack.

Highlights

  • Stores up to 1/4 cord of firewood
  • Holds 400 lb with heavy-duty steel frame
  • Powder-coated steel resists rust and corrosion
  • 140 mm elevated base improves air circulation
  • 600D Oxford cover with PU coating blocks rain and snow

Specifications

TypeOther Appliances

Questions about this item

How do I assemble the 20 mm square tubes and which hardware goes where?

Bolt the two side frames to the six base rails using the 16 M6×50 mm screws and nuts; use the 16 M6×10 mm screws for the remaining joints. Tighten everything with the included Allen and hex wrenches before loading wood.

What upkeep does the 600D Oxford fabric cover need over time?

Rinse the PU-coated cover with water and mild soap when dirty; avoid abrasive cleaners. Check seams and tie-downs each season and replace the cover if the waterproof coating begins to peel.

At what point does the 400 lb weight limit become a concern during daily use?

The frame is rated for 400 lb total; a full 1/4 cord of seasoned hardwood typically stays under that limit, but green or wet logs can exceed it, so weigh a typical load if unsure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.