We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey vertical air compressor tank with twin silencers and caster wheels

VEVOR

VEVOR 4.8 Gallon Air Compressor 1.2HP 2.2 CFM 70 dB

SKU CH-E2R2-NFWC4

A 4.8 gallon oil-free compressor delivers 2.2 CFM at 90 PSI with a quiet 70 dB rating for tire inflation, spray painting and nailing

  • TypeOther Appliances
  • Width11.02
  • Oil-free motor delivers 2.2 CFM@90 PSI for pneumatic tools
  • 70 dB ultra-quiet operation with dual silencers for low-noise workspaces
  • 8-gallon 18 L tank sustains 87-116 PSI working pressure
  • 33 lbs 15 kg with casters and foot pad for portable job-site use
  • 2 HP 900 W motor at 3500 RPM on 120 V 60 Hz power

What this compressor is and who it suits

The VEVOR 4.8 gallon air compressor delivers 1.2 HP and 2.2 CFM at 90 PSI from an oil-free motor running at 3500 RPM. It targets hobbyists and light trade users who need a portable air source for nail guns, impact wrenches, spray guns or tyre inflation. The 70 dB noise level suits indoor workshops or residential garages where louder units would be disruptive.

Tank capacity and usable airflow

The 18 L tank stores air at a working pressure of 87 to 116 PSI, giving enough reserve for intermittent nailing, stapling or spray painting sessions. Continuous high-demand tools such as sanders or large impact wrenches will outrun the 2.2 CFM delivery, causing pressure to drop until the motor catches up. The oil-free pump eliminates oil changes and allows operation in cold conditions down to -59.

Limits of the 120 V single-phase supply

Running on 120 V AC at 60 Hz, the 900 W motor draws near the practical limit of a standard North American household circuit, so the compressor should run on a dedicated outlet to avoid tripping breakers. Maximum bearing pressure is rated at 3.5 MPa, and the thermal protection trips at 150 °C (302 °F). The unit weighs 15 kg and measures 52 x 29 x 52 cm with casters fitted for mobility.

Highlights

  • Oil-free motor delivers 2.2 CFM@90 PSI for pneumatic tools
  • 70 dB ultra-quiet operation with dual silencers for low-noise workspaces
  • 8-gallon 18 L tank sustains 87-116 PSI working pressure
  • 33 lbs 15 kg with casters and foot pad for portable job-site use
  • 2 HP 900 W motor at 3500 RPM on 120 V 60 Hz power

Specifications

TypeOther Appliances
Width11.02

Questions about this item

Will the 2.2 CFM at 90 PSI output keep up with a finish nailer I already own?

The compressor delivers 2.2 CFM at 90 PSI, which meets the typical demand of most finish nailers and brad nailers for intermittent use.

How can I confirm the unit is running at the rated 70 dB after I set it up?

Use a phone sound-meter app at one metre distance while the pump cycles; a reading near 70 dB indicates the twin silencers are functioning as designed.

What comes in the box and what must I buy separately to start spraying paint?

The package includes the compressor, two silencers, a foot pad and two casters; you will need to supply an air hose, a spray gun, and suitable fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.