We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop thickness planer with 13 inch table, three blades, dual speed controls, cast iron bed and extension tables

VEVOR

VEVOR 3303 Benchtop Thickness Planer 13" Dual Speed 3-Blade 15A 2000W

SKU CH-3GA2-S4TEM MPN 3303

Benchtop thickness planer with a 13 in worktable, three-knife cutter head and dual feed speeds of 24 or 15 f/m for smooth finishes

  • TypeOther Appliances
  • Width14.57
  • Planes boards up to 13 in wide and 6 in thick on a 35 in extended table
  • Three hardened HRC55-60 steel knives deliver smooth, consistent cuts with quick-change convenience
  • Dual feed speeds of 24 f/m for fast stock removal or 15 f/m for figured grain finish
  • 15 A 2000 W motor at 23500 rpm powers through hardwoods and softwoods alike
  • Compact 20.7 x 27.4 x 18.9 in footprint weighs 61.7 lbs for benchtop stability

Benchtop Thickness Planer 13 in

The VEVOR 3303 is a new benchtop thickness planer built for woodworkers who need to dimension boards up to 13 inches wide and 6 inches thick. A 15-amp 2000-watt motor drives a three-knife cutter head hardened to HRC55-60 for consistent material removal. Extended tables provide 35 inches of total support length for long stock.

Dual Feed Speeds 24 and 15 fpm

The single specification that decides fit is the dual-speed feed control offering 24 feet per minute for fast thicknessing or 15 feet per minute for a smoother finish on figured wood with minimal tear-out. Maximum cutting depth is 1/8 inch per pass and the extra-large thickness scale aids repeatable accuracy.

Setup And Blade Changes

The unit weighs 61.7 lbs and measures 20.7 by 27.4 by 18.9 inches, so a sturdy bench and adequate clearance are required. The quick-change three-knife cutter head simplifies blade replacement, but knives must be set precisely to maintain coplanar alignment with the cast iron bed and steel plate. Dust extraction is recommended to keep the feed rollers clean.

Highlights

  • Planes boards up to 13 in wide and 6 in thick on a 35 in extended table
  • Three hardened HRC55-60 steel knives deliver smooth, consistent cuts with quick-change convenience
  • Dual feed speeds of 24 f/m for fast stock removal or 15 f/m for figured grain finish
  • 15 A 2000 W motor at 23500 rpm powers through hardwoods and softwoods alike
  • Compact 20.7 x 27.4 x 18.9 in footprint weighs 61.7 lbs for benchtop stability

Specifications

TypeOther Appliances
Width14.57

Questions about this item

What does the 15 A 2000 W motor rating mean for day-to-day planing?

It delivers enough power to run the three-knife cutter head at 23 500 rpm and feed stock at up to 236 in/min without bogging down on hardwoods up to 6 in thick.

How do the two feed speeds of 24 f/m and 15 f/m affect the cut?

The 24 f/m setting removes material quickly for rough dimensioning, while 15 f/m slows the feed for a finer surface on figured grain with less tear-out.

What bench space and support does the 3303 need to sit securely?

The unit measures 20.7 x 27.4 x 18.9 in and weighs 61.7 lbs; with pull-out extensions deployed it spans 35 in of total table length for long boards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.